A Novel Fault Detection and Identification Framework for Rotating Machinery Using Residual Current Spectrum
Open Access
Abstract
A novel framework of model-based fault detection and identification (MFDI) for induction motor (IM)-driven rotating machinery (RM) is proposed in this study. A data-driven subspace identification (SID) algorithm is employed to obtain the IM state-space model from the voltage and current signals in a quasi-steady-state condition. This study aims to improve the frequency–domain fault detection and identification (FDI) by replacing the current signal with a residual signal where a thresholding method is applied to the residual signal. Through the residual spectrum and threshold comparison, a binary decision is made to find fault signatures in the spectrum. The statistical Q-function is used to generate the fault frequency band to distinguish between the fault signature and the noise signature. The experiment in this study is performed on a wastewater pump in an existing industrial facility to verify the proposed FDI. Two faulty conditions with mathematically known and mathematically unknown faulty signatures are experimented with and diagnosed. The study results present that the residual spectrum demonstrated to be more sensitive to fault signatures compare to the current spectrum. The proposed FDI has successfully shown to identify the fault signatures even for the mathematically unknown faulty signatures.Keywords
Funding Information
- the Ministry of Science and Technology, Taiwan, R.O.C. (MOST 109-2221-E-011-075-)
This publication has 33 references indexed in Scilit:
- Condition Monitoring of an Induction Motor Stator Windings Via Global Optimization Based on the Hyperbolic Cross PointsIEEE Transactions on Industrial Electronics, 2014
- Data‐driven subspace‐based adaptive fault detection for solar power generation systemsIET Control Theory & Applications, 2013
- Subspace aided data-driven design of robust fault detection and isolation systemsAutomatica, 2011
- Unified model-based fault diagnosis for three industrial application studiesControl Engineering Practice, 2011
- Detection of broken rotor bars in induction motors using nonlinear Kalman filtersISA Transactions, 2010
- Comparison between vibration and stator current analysis for the detection of bearing faults in asynchronous drivesIET Electric Power Applications, 2010
- An overview of subspace identificationComputers & Chemical Engineering, 2006
- Condition Monitoring and Fault Diagnosis of Electrical Motors—A ReviewIEEE Transactions on Energy Conversion, 2005
- Algorithms for Subspace State-Space System Identification: An Overview1999
- N4SID: Subspace algorithms for the identification of combined deterministic-stochastic systemsAutomatica, 1994