Room Temperature Mechanical Properties of A356 Alloy with Ni Additions from 0.5 Wt to 2 Wt %
Authors:
- Lucia LattanziLucia Lattanzi
- Maria Teresa Di GiovanniMGMaria Teresa Di Giovanni
- Maverick GiovagnoliMGMaverick Giovagnoli
- Annalisa FortiniAnnalisa Fortini
- Mattia MerlinMattia Merlin
- Daniele CasariDCDaniele Casari
- Marisa Di SabatinoMSMarisa Di Sabatino
- Emanuela CerriEmanuela Cerri
- Gian Luca GaragnaniGGGian Luca Garagnani
Open Access
Abstract
In recent years, the influence of Ni on high-temperature mechanical properties of casting Al alloys has been extensively examined in the literature. In the present study, room temperature mechanical properties of an A356 alloy with Ni additions from 0.5 to 2 wt % were investigated. The role of Ni-based compounds and eutectic Si particles in reinforcing the Al matrix was studied with image analysis and was then related to tensile properties and microhardness. In the as-cast condition, the formation of the 3D network is not sufficient to determine an increase of mechanical properties of the alloys since fracture propagates by cleavage through eutectic Si particles and Ni aluminides or by the debonding of brittle phases from the aluminum matrix. After T6 heat treatment the increasing amount of Ni aluminides, due to further addition of Ni to the alloy, together with their brittle behavior, leads to a decrease of yield strength, ultimate tensile strength, and Vickers microhardness. Despite the fact that Ni addition up to 2 wt % hinders spheroidization of eutectic Si particles during T6 heat treatment, it also promotes the formation of a higher number of brittle Ni-based compounds that easily promote fracture propagation.Keywords
This publication has 23 references indexed in Scilit:
- Influence of Ultrasound Treatment on Cavitation Erosion Resistance of AlSi7 AlloyMaterials, 2017
- The influence of Cu, Mg and Ni on the solidification and microstructure of Al-Si alloysIOP Conference Series: Materials Science and Engineering, 2016
- Effect of thermally stable Cu- and Mg-rich aluminides on the high temperature strength of an AlSi12CuMgNi alloyMaterials Characterization, 2014
- Effect of main alloying elements on strength of Al–Si foundry alloys at elevated temperaturesInternational Journal of Cast Metals Research, 2012
- Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloysActa Materialia, 2011
- Three-dimensional study of Ni aluminides in an AlSi12 alloy by means of light optical and synchrotron microtomographyActa Materialia, 2009
- A study on the structural, age hardening and mechanical characteristics of Mn and Ca added Al–7Si–0.3Mg–0.6Fe alloyJournal of Alloys and Compounds, 2008
- The mechanisms of long fatigue crack growth behaviour in Al–Si casting alloys at room and elevated temperatureMaterials Science and Technology, 2007
- Understanding mechanisms of grain refinement of aluminium alloys by inoculationMaterials Science and Technology, 2004
- Microstructure and mechanical properties of unidirectionally solidified Al-Si-Ni ternary eutecticMetallurgical Transactions A, 1975