Oxidation Resistance and Microstructure Evaluation of a Polymer Derived Ceramic (PDC) Composite Coating Applied onto Sintered Steel
Open Access
Abstract
Powder metallurgy is a competitive technology to produce ferrous near net shape parts for diverse engineering applications. However, their inherent porosity increases the susceptibility to oxidation and sealing their surface is mandatory to avoid premature degradation. Alongside, polymer derived ceramics (PDCs), such as silicon-carbonitride, have drawn attention concerning their high temperature and chemical stability. However, PDCs undergo volume shrinkage during ceramization that leads to defect formation. The shrinkage can be compensated by the addition of fillers, which are also capable of tailoring the ceramic resulting properties. This work evaluates the processing of PDC-based coatings loaded with ZrO2 and glass fillers to compensate for the shrinkage, densify the coating and seal the sintered steel surface. Therefore, polymeric slurries were sprayed onto sintered steel substrates, which were pyrolyzed at different temperatures for microstructural and oxidation resistance evaluation. Microstructural modifications caused by the enhanced glass viscous flow during pyrolysis at 800 °C resulted in more homogeneous, dense and protective coatings, which reduced the mass gain up to 40 wt% after 100 h of oxidation at 450 °C in air in comparison to the uncoated substrate. Moreover, no macrocracks or spallation were detected, confirming the feasibility of PDC composite barrier coatings for sintered steels.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (MO851/14)
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (019/12 and 1917/2012)
This publication has 44 references indexed in Scilit:
- High performance environmental barrier coatings, Part I: Passive filler loaded SiCN system for steelJournal of the European Ceramic Society, 2011
- Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced CeramicsJournal of the American Ceramic Society, 2010
- Al2O3–SiC composites prepared by warm pressing and sintering of an organosilicon polymer-coated alumina powderJournal of the European Ceramic Society, 2007
- Silicon-Based Polymer-Derived Ceramics: Synthesis Properties and Applications-A ReviewJournal of the Ceramic Society of Japan, 2006
- High-temperature oxidation of pure Fe and the ferritic steel 2.25Cr1MoMaterials Research, 2005
- Plasma sintering of unalloyed iron: a study of surface porosityMaterials Research, 2004
- Roughness parametersJournal of Materials Processing Technology, 2002
- Sintering of powder mixtures and the growth of ferrous powder metallurgyMaterials Chemistry and Physics, 2001
- Corrosion protection of sintered metal parts by coating deposition. Part II: Corrosion and electrochemical characterizationMaterials and Corrosion, 1994
- Relation Between Roughness of Interface and Adherence of Porcelain Enamel to SteelJournal of the American Ceramic Society, 1953