On some aspects of numerical solutions of thin-film and mixed elastohydrodynamic lubrication
Author:
- 1 May 2007
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 221 (5) , 561-579
Abstract
Numerical solution of the thin-film and mixed elastohydrodynamic lubrication (EHL) is of great importance to the study of lubrication transition and breakdown, as well as surface failures caused by contact. However, in this region, converged and accurate numerical solutions become difficult, and effects of computational mesh density and differential schemes appear to be more significant. Also, there is currently a debate on how surface contact should be defined and analysed, and whether it is indeed possible to model contact through a grid-converged solution of the EHL equation system. This paper presents a set of analysed sample cases with different computational meshes, different cut-off values for handling contact, on different levels of central film thickness, from several hundred nanometres down to zero. Based on the results, some key issues are discussed (such as whether the contact can be modelled with the Reynolds equation system, how a contact should be defined and analysed, how computational meshes should be selected and managed, what the reasonable and satisfactory convergence accuracy should be, and so on). In addition, a progressive mesh densification (PMD) method is presented and compared with the multi-grid (MG) method. It is demonstrated that the PMD method may be able to significantly reduce computing time. On the other hand, the MG method may be good for thick-film cases with smooth surfaces or low frequency roughness, but is not desirable for the ultra-thin film and mixed EHL, especially when moderate and high frequency surface roughness is involved.Keywords
This publication has 25 references indexed in Scilit:
- A Full Numerical Solution to the Mixed Lubrication in Point ContactsJournal of Tribology, 1999
- Numerical Analysis for the Elastic Contact of Real Rough SurfacesTribology Transactions, 1999
- Film Thickness in Starved EHL Point ContactsJournal of Tribology, 1998
- Point Contact EHL Based on Optically Measured Three-Dimensional Rough SurfacesJournal of Tribology, 1997
- Thermal EHL Analysis of Circular Contacts With Measured Surface RoughnessJournal of Tribology, 1996
- Numerical Simulation of a Transverse Ridge in a Circular EHL Contact Under Rolling/SlidingJournal of Tribology, 1994
- A Full Numerical Solution for the Thermoelastohydrodynamic Problem in Elliptical ContactsJournal of Tribology, 1984
- The Isothermal Elastohydrodynamic Lubrication of SpheresJournal of Lubrication Technology, 1981
- Inverse Solution of Reynolds’ Equation of Lubrication Under Point-Contact Elastohydrodynamic ConditionsJournal of Lubrication Technology, 1981
- Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part 1—Theoretical FormulationJournal of Lubrication Technology, 1976