Models for the Prediction of Performance and Emissions in a Spark Ignition Engine - A Sequentially Structured Approach
- 23 February 1998
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
A thermodynamic model for the simulation of performance and emissions in a spark ignition engine is presented. The model is part of an integrated system of models with a hierarchical structure developed for the study and the optimal design of engine control strategies. In order to reduce the uncertainty due to the mutual interference during the validation phase, the model has been developed accordingly with a hierarchical and sequential structure. The main thermodynamic model is based on the classical two zone approach. A multi-zone model is then derived form the two zone calculation, for a proper evaluation of temperature gradients in the burned gas region. The emissions of HC, CO and NOx are then predicted by three sub-models. In order to make the precision of emission models suitable for engine control design, an identification technique based on decomposition approach has been developed, for the definition of optimal model structure with a minimum number of parameters. The results of the thermodynamic cycle model validation, performed over more than 300 engine operating conditions, show a satisfactory level of agreement between measured and predicted data cycles. Afterward, the two step identification procedure has been applied for the emission models parameters identification. From this analysis, it has been found that the model precision achieved can be comparable with that obtained via conventional mapping procedures using black-box models, but with a drastic reduction of the experimental effort. Moreover, the proposed approach allows substantial computational time saving with respect to conventional identification techniques.Keywords
This publication has 12 references indexed in Scilit:
- Development and Validation of Hierarchical Models for the Design of Engine Control StrategiesMeccanica, 1997
- A Feedgas HC Emission Model for SI Engines Including Partial Burn EffectsSAE International Journal of Advances and Current Practices in Mobility, 1993
- A stochastic approach for the optimization of open-loop engine control systemsAnnals of Operations Research, 1991
- SI Engine Controls and Mean Value Engine ModellingSAE International Journal of Advances and Current Practices in Mobility, 1991
- A Model for Hydrocarbon Emissions from SI EnginesSAE International Journal of Advances and Current Practices in Mobility, 1990
- The public debt perception issue1990
- Mechanism and modeling of nitrogen chemistry in combustionProgress in Energy and Combustion Science, 1989
- Numerical recipes: the art of scientific computingAnalytica Chimica Acta, 1987
- Quench Layer Contribution to Exhaust Hydrocarbons from a Spark-Ignited EngineCombustion Science and Technology, 1981
- A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion EngineSAE International Journal of Advances and Current Practices in Mobility, 1967