Ignition of various wood species by radiant energy
Authors:
- 1 January 2011
- journal article
- Published by Pleiades Publishing Ltd in Combustion, Explosion, and Shock Waves
- Vol. 47 (1) , 65-69
Abstract
The ignition of various wood species by exposure to the radiation of a DKsR-10000 xenon lamp was investigated. Time dependences of ignition delay on the radiant energy intensity were obtained for various wood species: cedar, larch, pine, birch, and aspen. The effect of the initial temperature and moisture content of wood on the ignition time was studied. The ignition temperature of pine and birch wood for various radiant energy intensities was determined by an optical method. It is shown that the ignition time of pine wood decreased by a factor of 1.5–2 as the initial temperature of samples was increased by 100 degrees. It was found that the ignition temperature of wood increased with increasing radiant flux density and depended on the wood species. Increasing the wood moisture content by a factor of 10 increased its ignition time by more than 50%.Keywords
This publication has 4 references indexed in Scilit:
- Ignition of Wood: A Review of the State of the ArtJournal of Fire Protection Engineering, 2002
- A new correlation for bench-scale piloted ignition data of woodFire Safety Journal, 1997
- Surface temperature at ignition of wooden based slabsFire Safety Journal, 1996
- Ignition and Combustion of wood in a heat flowCombustion, Explosion, and Shock Waves, 1986