1.2 Racing Down the Slopes of Moore’s Law
Author:
- 18 February 2024
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 67, 16-23
Abstract
Since its inception, Moore’s Law has been the driving force for IC design. Although during the first decade, “everything” seemed to be better, however, we lost the scaling of processor clock speed and RF transistor speed, and now it looks as if power efficiency of digital gates will stall. What remains is scaling in transistor count and cost-per-function, thanks to 3D integration.Thus, this is an excellent moment to reconsider how we design for analog and digital signal processing. The higher the required signal-to-noise ratio (SNR), the more power-efficient digital signal processing is compared to analog. Pure analog processing remains more efficient only for $\sim 30 \mathrm{~dB}$ SNR or less. In the case of digital processing, the conversion from analog to digital should therefore be made as early in the signal chain as possible. Thanks to the figure-of-merit race, analog-to-digital converters (ADCs) have experienced a tremendous win in power efficiency. However, these ADCs require a large input voltage swing while the input signals to be converted, from an antenna or sensor interface, are usually much smaller. Therefore, RF and analog front-ends are needed, which consume much more power than the ADCs to be driven.Let us re-think these analog front-ends. Can we still efficiently design these front-ends in future CMOS? Do we need so much linear amplification? Do we need active linear circuits at all? Can we not use “digital” components to replace the analog front-ends and ADCs?This paper aims to look at digital and analog processing trends from technology and design fundamentals points of view. We will first zoom out on asymptotic trends in technology scaling and try to identify future design opportunities and challenges. For circuit design, fundamental limits linking power, speed, and accuracy will be reviewed to gain insight into the implications of how we design circuits the way we currently do. This paper aims to create awareness and gives a new vision of designing analog circuits.
Keywords
Funding Information
- European Research Council
This publication has 37 references indexed in Scilit:
- A 3nm CMOS FinFlex™ Platform Technology with Enhanced Power Efficiency and Performance for Mobile SoC and High Performance Computing Applications2022
- A 4MS/s 10b SAR ADC with integrated Class-A buffers in 65nm CMOS with near rail-to-rail input using a single 1.2V supply2019
- 2.4 A 0.028mm2 11mW single-mixing blocker-tolerant receiver with double-RF N-path filtering, S11 centering, +13dBm OB-IIP3 and 1.5-to-2.9dB NF2015
- 11.2 A 0.85fJ/conversion-step 10b 200kS/s subranging SAR ADC in 40nm CMOS2014
- Continuing to shrink: Next-generation lithography - Progress and prospects2013
- A 0.2-to-2.0GHz 65nm CMOS receiver without LNA achieving ≫11dBm IIP3 and ≪6.5 dB NF2009
- Future of analog in the VLSI environment2002
- Analog circuit performance and process scalingIEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 1999
- Analog Circuit Design1999
- A 0.25-mW low-pass passive sigma-delta modulator with built-in mixer for a 10-MHz IF inputIEEE Journal of Solid-State Circuits, 1997