Impact behavior of short and continuous fiber-reinforced polyester composites
Authors:
- 3 August 2010
- journal article
- other
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 29 (23) , 3463-3474
Abstract
In this study, the impact strengths of E-glass, coir, oil palm as well as E-glass/coir and E-glass/oil palm hybrid polyester composites were studied. All types of composites were reinforced with fiber volume fractions of 30%, 40%, and 50% and fiber lengths 3, 7, and 10 mm. Composite laminates reinforced with longitudinal and transverse coir fiber mats were also studied. The number of fiber mats varied from 1, 2, 3, and 4 layers for non-spaced fiber mats and 2, 3, and 4 layers for 1.5 mm spaced fiber mats. Besides, coir—polyester composite with addition of sand filler was studied as well, with 40%, 50%, and 60% of volume fractions and fiber lengths of 3, 7, and 10 mm. Results show that impact strength improves with fiber content and fiber length. In addition, longitudinal fiber mats always exhibit better impact toughness compared to transverse fiber mats. Impact strength is improved with the number of fiber layers but worsened by the fiber spacing. As for coir/polyester concrete, low fiber content and fiber length improve the impact strength. The fractured surfaces were inspected under scanning electron microscope to investigate the fracture mechanisms in each type of composites.Keywords
This publication has 50 references indexed in Scilit:
- Effects of fillers on the fracture behaviour of particulate polyester compositesThe Journal of Strain Analysis for Engineering Design, 2009
- Agro-hybrid Composite: The Effects on Mechanical and Physical Properties of Oil Palm Fiber (EFB)/Glass Hybrid Reinforced Polyester CompositesJournal of Reinforced Plastics and Composites, 2007
- The Static and Dynamic Mechanical Properties of Banana and Glass Fiber Woven Fabric-Reinforced Polyester CompositeJournal of Composite Materials, 2005
- Role of particle size and filler–matrix adhesion on dynamic fracture of glass-filled epoxy. I. MacromeasurementsActa Materialia, 2005
- Studies on mechanical performance of biofibre/glass reinforced polyester hybrid compositesComposites Science and Technology, 2003
- Life cycle assessment of biofibres replacing glass fibres as reinforcement in plasticsResources, Conservation and Recycling, 2001
- Biofibres, biodegradable polymers and biocomposites: An overviewMacromolecular Materials and Engineering, 2000
- Parameters determining the strength and toughness of particulate filled epoxide resinsJournal of Materials Science, 1987
- Sunhemp fibre-reinforced polyesterJournal of Materials Science, 1986
- Alkali treatment of coir fibres for coir-polyester compositesJournal of Materials Science, 1983