Effect of Oxidation Temperature on the Oxidation Process of Silicon-Containing Steel
Open Access
Abstract
The oxidation behavior of silicon-containing steel was studied by applying segmented heating routes similar to the atmosphere and heating process in an industrial reheating furnace. The oxidation tests were carried out on a simultaneous thermal analyzer at heating temperatures of 1150 °C–1300 °C. The morphologies of Fe2SiO4 were observed by SEM, and the penetration depths of the Fe2SiO4 layer at different oxidation temperatures were determined by using the Image-Pro Plus 6.0 software. The results show that at heating temperatures ≥1235 °C, the oxidation rate and total oxidation mass gain have no relation with the heating temperature; the mass gain versus time follows a linear law after about 1164 °C (lower than the eutectic temperature of fayalite). In addition, the oxidation rate first decreases slowly and then drops from 1190 °C to 1210 °C during the isothermal holding stage. With the increase in temperature, the oxidation rate and mass gain also increase gradually; the relationship between the mass gain and time is close to a parabolic law. Moreover, at a heating temperature of 1150 °C, the oxidation rate decreases rapidly during the isothermal holding stage, and the mass gain versus time follows a parabolic law.Keywords
Funding Information
- National Natural Science Foundation of China (No. 51274154)
- National High Technology Research and Development Program of China (2012AA03A504)
- State Key Laboratory of Development and Application Technology of Automotive Steels (Baosteel Group)
This publication has 26 references indexed in Scilit:
- The Effect of the Si Content on the Morphology and Amount of Fe2SiO4 in Low Carbon SteelsMetals, 2016
- The effects of Nb and Mo addition on transformation and properties in low carbon bainitic steelsMaterials & Design, 2015
- Effects of Silicon on Mechanical Properties and Fracture Toughness of Heavy-Section Ductile Cast IronMetals, 2015
- Morphology of Oxide Scale and Oxidation Kinetics of Low Carbon SteelJournal of Iron and Steel Research International, 2014
- Effect of silicon content in steel and oxidation temperature on scale growth and morphologyMaterials Chemistry and Physics, 2014
- Rust formation and corrosion performance of Si- and Al-bearing ultrafine grained weathering steelCorrosion Science, 2008
- High-Temperature Oxidation of Fe- Si Alloys in the Temperature Range 900-1250°CDefect and Diffusion Forum, 2008
- Oxidation Behavior and Scale Properties on the Si Containing SteelsMaterials Science Forum, 2006
- Prevention of Red Scale Formation during Hot Rolling of Steels.ISIJ International, 1995
- Mechanism of Red Scale Defect Formation in Si-added Hot-rolled Steel Sheets.ISIJ International, 1994