KNO3-Loaded Coffee Husk Ash as a Heterogeneous Alkali Catalyst for Waste Frying Oil Valorization into Biodiesel
Open Access
- 30 November 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (49) , 45129-45143
Abstract
In this study, a heterogeneous basic catalyst was synthesized from a catalyst composite material (CCM) of coffee husk ash and char mixture (A/C) impregnated with KNO3 and employed to transesterify crude waste frying oil (WFO). The effect of CCM calcination temperature (CCMCT) (500-700 °C) on the catalyst physicochemical properties was investigated. A differential scanning calorimeter was used to examine potential phase changes during the calcination of A/C and CCM. The catalysts from each CCMCT were characterized by X-ray diffraction (XRD), Brunauer-Emmet-Teller surface area analyzer, scanning electron microscopy (SEM), SEM with energy-dispersive X-ray diffractometer, colorimeter, and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectrometer. The methoxy functional group FTIR peak integral value and the dynamic viscosity of the biodiesel synthesized by each catalyst were used to determine the qualitative WFO conversion. Furthermore, the quantitative WFO conversion was determined using nuclear magnetic resonance (1H NMR) analysis. Crystallinity, elemental composition, basicity, and morphology of catalysts were highly dependent on the CCMCT. Without transesterification condition optimization (reaction temperature of 45 ± 2.5 °C, catalyst loading of 3 wt %, methanol to oil molar ratio of 12:1, and reaction time of 1 h), a higher catalytic performance (72.04% WFO conversion) was reached using a catalyst from the CCMCT of 600 °C. When using a coffee husk ash catalyst without KNO3 impregnation (C-00-600), the WFO conversion was only 52.92%. When comparing the C-25-600 and C-00-600 catalysts, it was observed that KNO3 impregnation had a substantial impact on the catalyst crystallinity, basicity, and morphology.Keywords
Funding Information
- Addis Ababa Science and Technology University
This publication has 75 references indexed in Scilit:
- Biodiesel production from soybean oil transesterification using tin oxide-supported WO3 catalystsFuel Processing Technology, 2013
- Wood ash as a potential heterogeneous catalyst for biodiesel synthesisBiomass and Bioenergy, 2012
- Ultrasonic transesterification of Jatropha curcas L. oil to biodiesel by a two-step processEnergy Conversion and Management, 2010
- The basicity of mixed oxides and the influence of alkaline metals: The case of transesterification reactionsApplied Catalysis A: General, 2010
- Effect of SO2 Dry Deposition on Porous Dolomitic LimestonesMaterials, 2010
- Production of biodiesel through transesterification of Jatropha oil using KNO3/Al2O3 solid catalystFuel, 2009
- Analyzing Sustainability of Community-based Energy TechnologiesEnergy Sources, Part B: Economics, Planning, and Policy, 2007
- New heterogeneous metal-oxides based catalyst for vegetable oil trans-esterificationJournal of the Brazilian Chemical Society, 2006
- Carbonated hydroxyapatite as bone substituteJournal of the European Ceramic Society, 2003
- Combustion characteristics of different biomass materialsEnergy Conversion and Management, 2003