Effect of Annealing Time on Texture Evolution of Fe–3.4 wt% Si Nonoriented Electrical Steel
Authors:
- 11 October 2023
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 94 (12)
Abstract
Herein, the effect of annealing time on the texture evolution in Fe–3.4 wt% Si non‐oriented electrical steel is investigated. Strip samples are cast using a vacuum sampling method, which simulate the solidification conditions of an industrial twin roll thin strip casting (TRSC) process. As‐cast samples with different carbon and sulfur (C&S) levels are hot rolled (HR) with varying levels of hot deformation, cold rolled (CR) to 0.35 mm thickness, and then annealed at 1050 °C for different holding times (1, 6, 24 h). To Fe–3.4 wt% Si nonoriented electrical steel, the observed texture evolution can be divided into different stages as annealing time is increased from 1 to 24 h. With increasing annealing time, the fraction of Goss texture decreases initially and then increases again through the consumption of grains with other textures. With additional time, a decrease of pinning force due to precipitate coarsening results in normal grain growth, resulting in an increase of grain size. In this step, Cube grains can form from rotated Goss grains. A model for core loss is presented and used to explain the core loss results.Keywords
This publication has 18 references indexed in Scilit:
- Effect of non-metallic precipitates and grain size on core loss of non-oriented electrical silicon steelsJournal of Magnetism and Magnetic Materials, 2018
- Effect of Al content on magnetic properties of Fe-Al Non-oriented electrical steelJournal of Magnetism and Magnetic Materials, 2017
- Development of the {113}〈uvw〉 texture during the annealing of a skew cold rolled non-oriented electrical steelScripta Materialia, 2016
- Occurrence of shear bands in rotated Goss ({110}〈110〉) orientations of metals with bcc crystal structureScripta Materialia, 2012
- Through process texture evolution and magnetic properties of high Si non-oriented electrical steelsMaterials Characterization, 2012
- Recent progress on commercialization of castrip direct strip casting technology at Nucor CrawfordsvilleMetallurgist, 2004
- Analysis of deformation textures of asymmetrically rolled steel sheetsInternational Journal of Mechanical Sciences, 2001
- A new model of Goss texture development during secondary recrystallization of electrical steelActa Materialia, 1997
- Occurrence of shear bands in heavily rolled cubic metalsMetal Science, 1979
- Size Effect in Heterogeneous NucleationThe Journal of Chemical Physics, 1958