Pitting Behavior of Duplex 308L Stainless Steel in Methanol/Water/HCl Solutions
Authors:
- 1 February 1982
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 38 (2) , 63-69
Abstract
Passivity breakdown experiments have been performed on a duplex stainless steel in 0.5N HCl, H2O/methanol solutions as a function of δ-ferrite content of the alloy and water/methanol ratios. Ferrite contents in a nominally 308L stainless steel were controlled by heat treatment at different temperatures in the two phase ferrite-austenite region followed by quenching. Microstructures consisting of 0 to 30 Vol% ferrite were produced. The corrosion behavior of the steel 308L is adversely influenced by the formation of δ-ferrite and by a decrease of the water content of the water/methanol corroding media: the passivation potential and the critical current density for passivation increases, the pitting potential and the repassivation range decreases. Increasing ferrite content from 0 to 1 Vol%, a pronounced shift of all these values occurs. The pitting resistance of duplex steel in strongly passivating (aqueous) solutions is primarily a function of the composition of δlγ interface, relatively independent of the interfacial area or of the ferrite content higher than 1 Vol%. The integrity of the passive film is thought to be associated with segregation of sulfur to the δlγ interface. The pits initiate in duplex alloy at the δlγ phase boundaries, in the single phase alloy at the sulfide inclusions. In weakly passivating solutions (less than 20 Vol% water), the integrity of passive film is reduced. General weakening of the passive film eliminates the preference of pit initiation sites to phase boundaries or sulfide inclusions and results in general pitting of the surface. Accordingly, the mechanism of pit formation in duplex and single phase alloy becomes identical.Keywords
This publication has 23 references indexed in Scilit:
- Das Korrosionsverhalten von Eisen, Zink, Aluminium und Chromnickelstahl im System Methanol‐Wasser‐ChlorwasserstoffMaterials and Corrosion, 1980
- Mechanism of Intergranular Corrosion and Pitting Corrosion of Austenitic and Duplex 308 Stainless SteelJournal of the Electrochemical Society, 1979
- The influence of non-metallic inclusion nature and shape on the pitting corrosion susceptibility of 18Cr9Ni and 17Cr11Ni2Mo austenitic stainless steelsCorrosion Science, 1979
- The influence of Mn compared to that of Cr, Mo and S on the resistance to initiation of pitting and crevice corrosion in austenitic stainless steelsMaterials and Corrosion, 1978
- Some Aspects of the Influence of Manganese in Austenitic Stainless SteelsMaterials and Corrosion, 1974
- Pitting and sulphide inclusions in steelCorrosion Science, 1974
- Über den Einfluß der Austenitstabilität von 18/8‐Chrom‐Nickel‐Stählen auf die Verformungseigenschaften und auf das Korrosionsverhalten dieser StähleMaterials and Corrosion, 1970
- Pitting corrosion of 13Cr-Fe alloy in Na2SO4 solutions containing chloride ionsCorrosion Science, 1967
- Einfluß der Gitterstruktur auf die Korrosion eines 18/10‐Chrom‐Nickel‐StahlesMaterials and Corrosion, 1964
- Beitrag zur Kinetik der Lochfraßkorrosion an passiven Chrom‐Nickel‐StählenMaterials and Corrosion, 1961