A persistent-mode 0.5 T solid-nitrogen-cooled MgB 2 magnet for MRI
- 29 December 2016
- journal article
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 30 (2) , 024011
Abstract
This paper presents construction details and test results of a persistent-mode 0.5 T MgB 2 magnet developed at the Francis Bitter Magnet Laboratory, MIT. The magnet, of 276 mm inner diameter and 290 mm outer diameter, consisted of a stack of eight solenoidal coils with a total height of 460 mm. Each coil was wound with monofilament MgB 2 wire, equipped with a persistent-current switch and terminated with a superconducting joint, forming an individual superconducting loop. Resistive solder joints connected the eight coils in series. The magnet, after being integrated into a testing system, immersed in solid nitrogen, was operated in a temperature range of 10–13 K. A two-stage cryocooler was deployed to cool a radiation shield and the cold mass that included mainly ∼60 kg of solid nitrogen and the magnet. The solid nitrogen was capable of providing a uniform and stable cryogenic environment to the magnet. The magnet sustained a 0.47 T magnetic field at its center persistently in a range of 10–13 K. The current in each coil was inversely calculated from the measured field profile to determine the performance of each coil in persistent-mode operation. Persistent-current switches were successfully operated in solid nitrogen for ramping the magnet. They were also designed to absorb magnetic energy in a protection mechanism; its effectiveness was evaluated in an induced quench.Keywords
Funding Information
- National Institute of Biomedical Imaging and Bioengineering (R01EB002887)
This publication has 29 references indexed in Scilit:
- Development of a 3 T–250 mm Bore $\hbox{MgB}_{2}$ Magnet SystemIEEE Transactions on Applied Superconductivity, 2014
- Development of a Compact 3 T $\hbox{MgB}_{2}$ MagnetIEEE Transactions on Applied Superconductivity, 2013
- Research on Stability of ${\rm MgB}_{2}$ Superconducting Magnet for MRIIEEE Transactions on Applied Superconductivity, 2010
- A Small 1.5 T Persistent Current Operating Test Magnet Using ${\rm MgB}_{2}$ Wire With High $j_{\rm c}$ JointsIEEE Transactions on Applied Superconductivity, 2010
- Research on ${\rm MgB}_{2}$ Superconducting Magnet With Iron Core for MRIIEEE Transactions on Applied Superconductivity, 2010
- Design, development and experiment of a 1.5 T MgB2 superconducting test magnetCryogenics, 2009
- Construction and Operation of Cryogen Free ${\hbox{MgB}}_{2}$ Magnets for Open MRI SystemsIEEE Transactions on Applied Superconductivity, 2008
- Design, Construction and Tests of MgB2 Coils for the Development of a Cryogen Free MagnetIEEE Transactions on Applied Superconductivity, 2007
- A checklist for designers of cryogen-free MgB2coilsSuperconductor Science and Technology, 2007
- Superconductivity at 39 K in magnesium diborideNature, 2001