Performance Evaluation of CO2 + SiCl4 Binary Mixture in Recompression Brayton Cycle for Warm Climates
Open Access
Abstract
This work demonstrates the potential of CO2 + SiCl4 binary mixture as a working fluid for power generation cycle. Recompression Brayton cycle configuration is considered due to its proven record of high performance for medium- to high-temperature sources. The objective of this study is to assess the thermodynamic performance of a recompression Brayton cycle using a CO2 + SiCl4 binary mixture as a working fluid, particularly under warm climate conditions. The cycle is simulated using the Peng–Robinson equation of state in Aspen Hysys (v11) software, and the model is validated by comparing VLE data against experimental data from the literature. The analysis involves the assessment of cycle’s thermal efficiency and exergy efficiency under warm climatic conditions, with a minimum cycle temperature of 40 °C. The results demonstrate a notable improvement in the cycle’s thermodynamic performance with CO2 + SiCl4 binary mixture compared to pure CO2. A small concentration (5%) of SiCl4 in CO2 increases the thermal efficiency of the cycle from 41.7% to 43.4%. Moreover, irreversibility losses in the cooler and the heat recovery unit are significantly lower with the CO2 + SiCl4 binary mixture than with pure CO2. This improvement enhances the overall exergy efficiency of the cycle, increasing it from 62.1% to 70.2%. The primary reason for this enhancement is the substantial reduction in irreversibility losses in both the cooler and the HTR. This study reveals that when using a CO2 + SiCl4 mixture, the concentration must be optimized to avoid condensation in the compressor, which can cause physical damage to the compressor blades and other components, as well as increase power input. This issue arises from the higher glide temperature of the mixture at increased SiCl4 concentrations and the limited heat recovery from the cycle.Keywords
Funding Information
- Institutional Fund Projects (IFPIP: 1367-135-1443)
- Ministry of Education and King Abdulaziz University, DSR, Jeddah, Saudi Arabia (IFPIP: 1367-135-1443)
This publication has 45 references indexed in Scilit:
- Experimental and Theoretical Study on Thermal Stability of Mixture R1234ze(E)/R32 in Organic Rankine CycleJournal of Thermal Science, 2023
- Structural Assessment of Printed Circuit Heat Exchangers in Supercritical CO2 Waste Heat Recovery Systems for Ship ApplicationsJournal of Thermal Science, 2022
- Numerical and Experimental Thermal–Hydraulic Performance Analysis of a Supercritical CO2 Brayton Cycle PCHE RecuperatorArabian Journal for Science and Engineering, 2021
- Thermal stability and decomposition mechanism of HFO‐1336mzz(Z) as an environmental friendly working fluid: Experimental and theoretical studyInternational Journal of Energy Research, 2019
- Preliminary assessment of sCO2 cycles for power generation in CSP solar tower plantsApplied Energy, 2017
- On the adoption of carbon dioxide thermodynamic cycles for nuclear power conversion: A case study applied to Mochovce 3 Nuclear Power PlantApplied Energy, 2016
- Modeling and analysis of a printed circuit heat exchanger for supercritical CO2 power cycle applicationsApplied Thermal Engineering, 2016
- HFOs as substitute for R-134a as working fluids in ORC power plants: A thermodynamic assessment and thermal stability analysisApplied Thermal Engineering, 2016
- Thermal stability of working fluids for organic Rankine cycles: An improved survey method and experimental results for cyclopentane, isopentane and n -butaneApplied Thermal Engineering, 2014
- A comparative study of the carbon dioxide transcritical power cycle compared with an organic rankine cycle with R123 as working fluid in waste heat recoveryApplied Thermal Engineering, 2006