Feasibility study of active screen plasma nitriding of titanium alloy
Authors:
- 1 February 2010
- journal article
- Published by SAGE Publications in Surface Engineering
- Vol. 26 (1-2) , 74-79
Abstract
A feasibility study of active screen plasma nitriding (ASPN) of Ti6Al4V titanium alloy was conducted using a CP-Ti cage as the active screen under various process conditions. The process variables included active screen setup parameters (two different potentials of 0%-bias and 100%-bias), treatment temperature (750 and 850°C), gas mixture (10/90, 25/75, 50/50 and 100/0 of N2/H2) and treatment time (10 h) under 1·5 mbar pressure. The samples were characterised by X-ray diffraction, optical microscopy, scanning electron microscopy, microhardness and surface roughness tests. The experimental results have demonstrated that Ti–6Al–4V alloy can be treated by ASPN using a Ti screen. A Ti nitride compound layer consisting of TiN followed by Ti2N was formed on top of the surface and an Al rich layer was formed between the Ti nitride layer and the α-Ti case. The surface hardness of the samples nitrided at 750 and 850°C was 800 and 1400 HV respectively.Keywords
This publication has 21 references indexed in Scilit:
- Potential of plasma nitriding of polymer for improved hardness and wear resistanceJournal of Materials Processing Technology, 2005
- Low-Temperature Salt Bath Nitriding of SteelsMetal Science and Heat Treatment, 2004
- Sliding wear properties of active screen plasma nitrided 316 austenitic stainless steelWear, 2004
- Corrosion properties of active screen plasma nitrided 316 austenitic stainless steelCorrosion Science, 2004
- Active screen plasma nitriding of austenitic stainless steelSurface Engineering, 2002
- Plasma Species Analysis for Insitu Assessment of Surface TreatmentsSurface Engineering, 2002
- Effect of workpiece geometry on the uniformity of nitrided layersSurface and Coatings Technology, 2001
- Layer-growth kinetics on gaseous nitriding of pure iron: Evaluation of diffusion coefficients for nitrogen in iron nitridesMetallurgical and Materials Transactions A, 1995
- Microstructure, corrosion and tribological behaviour of plasma immersion ion-implanted austenitic stainless steelSurface and Coatings Technology, 1993
- Plasma surface engineering of low alloy steelMaterials Science and Engineering: A, 1991