Effect of Carbon-Fiber-Reinforced Polymer Laminate Configuration on the Behavior of Strengthened Reinforced Concrete Beams
Authors:
- 1 June 2004
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 8 (3) , 229-240
Abstract
This paper presents test results of 18 small-scale reinforced concrete specimens of strengthened beams using carbon-fiber-reinforced polymer (CFRP) composites. The specimens were instrumented with strain gauges in a region where cracks in the concrete were preformed to monitor the variation of strains throughout testing. Results indicate that there can be a very large variation in the measured strains in the composites depending, not only on the location of the cracks, but also on the configuration used to bond the composites to the surface of the elements. The interface shear stresses generated at failure of the beams are compared with two existing analytical models. Additionally, the stress level in the composites was determined for all the strengthened specimens from the experimental data. The calculated stress in the composites reached between 20 and 43% of the CFRP rupture stress. The information presented in this paper provides information that can be used to validate or modify current design proced...Keywords
This publication has 6 references indexed in Scilit:
- Interfacial shear stress concentration in FRP-strengthened beamsComposite Structures, 2001
- Brittle Failure and Bond Development Length of CFRP-Concrete BeamsJournal of Composites for Construction, 2001
- Transfer Lengths and Bond Strengths for Composites Bonded to ConcreteJournal of Composites for Construction, 1999
- Design Guidelines for Flexural Strengthening of RC Beams with FRP PlatesJournal of Composites for Construction, 1998
- Strengthening of reinforced concrete beams with externally bonded fiber-reinforced-plastic plates: design guidelines for shear and flexureCanadian Journal of Civil Engineering, 1998
- THEORETICAL STUDY OF THE BEHAVIOUR OF REINFORCED CONCRETE BEAMS STRENG -THENED BY EXTERNALLY BONDED STEEL PLATES.Proceedings of the Institution of Civil Engineers, 1989