Experimental Study on Laser-MIG Hybrid Welding of Thick High-Mn Steel Plate for Cryogenic Tank Production
Open Access
- 31 May 2021
- journal article
- research article
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (6) , 604
Abstract
The International Maritime Organization has recently updated the ship emission standards to reduce atmospheric contamination. One technique for reducing emissions involves using liquefied natural gas (LNG). The tanks used for the transport and storage of LNG must have very low thermal expansion and high cryogenic toughness. For excellent cryogenic properties, high-Mn steel with a complete austenitic structure is used to design these tanks. We aim to determine the optimum welding conditions for performing Laser-MIG (Metal Inert Gas) hybrid welding through the MIG leading and laser following processes. A welding speed of 100 cm/min was used for welding a 15 mm thick high-Mn steel plate. The welding performance was evaluated through mechanical property tests (tensile and yield strength, low-temperature impact, hardness) of the welded joints after performing the experiment. As a result, it was confirmed that the tensile strength was slightly less than 818.4 MPa, and the yield strength was 30% higher than base material. The low-temperature impact values were equal to or greater than 58 J at all locations in the weld zone. The hardness test confirmed that the hardness did not exceed 292 HV. The results of this study indicate that it is possible to use laser-MIG hybrid welding on thick high-Mn steel plates.Keywords
This publication has 19 references indexed in Scilit:
- Economic assessment of liquefied natural gas (LNG) as a marine fuel for CO2 carriers compared to marine gas oil (MGO)Energy, 2017
- Relationship between pool characteristic and weld porosity in laser arc hybrid welding of AA6082 aluminum alloyJournal of Materials Processing Technology, 2017
- Effects of laser focusing properties on weldability in high-power fiber laser welding of thick high-strength steel plateJournal of Laser Applications, 2016
- Feasibility and commercial considerations of LNG-fueled shipsOcean Engineering, 2016
- Natural gas as a marine fuelEnergy Policy, 2015
- An experimental study on fatigue performance of cryogenic metallic materials for IMO type B tankInternational Journal of Naval Architecture and Ocean Engineering, 2013
- Laser Beam Submerged Arc Hybrid WeldingPhysics Procedia, 2012
- Comparison between SAW and laser welding processes applied to duplex structures for bridgesWelding International, 2009
- Interfacial Structure and Micro and Nano-Mechanical Behavior of Laser-Welded 6061 Aluminum Alloy BlankJournal of Engineering Materials and Technology, 2004
- Correlation between solidification parameters and weld microstructuresInternational Materials Reviews, 1989