Effect of nano-silica and sisal fibre on the mechanical and durability properties of concrete
Open Access
- 11 February 2026
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Abstract
Fiber reinforced cementitious composites provide higher strength, lower weight, and higher toughness, and have consistently been employed in engineering applications. This research focused on the combined effect of nano silica with sisal fibres in concrete. Sisal Fiber-reinforced concretes offer measurable improvements in tensile strength, deformability, and durability, as well as moderate enhancement in compressive strength, when compared to ordinary concrete. Around 90 specimens were tested for mechanical properties and 48 specimens were evaluated for durability performance to ensure statistical reliability. Different lengths of constant 1.5% sisal fiber (6, 12, and 18 mm) and constant 3% nano silica are substituted in conventional concrete. Tensile, flexural, and compressive strengths were measured through laboratory tests, and durability performance was assessed using chloride penetration and acid resistance tests. Concrete with 1.5% sisal fibres (12 mm length) and 3% nano silica showed enhanced mechanical strength, with percentage improvements of 7.8% in compressive strength, 16.8% in tensile strength, and 19.2% in flexural strength compared to conventional concrete, while the mix with 1.5% sisal fibres (18 mm length) and 3% nano silica exhibited improved durability compared to conventional concrete. As a result, sisal fibres and nano silica can be used to make low-cost, low-energy-consumption concrete with potential applicability in non-structural and semi-structural concrete elements where enhanced durability and crack resistance are required.Keywords
This publication has 40 references indexed in Scilit:
- Investigating the mechanical behaviour of bamboo fiber-reinforced concrete with GGBFS for sustainable constructionDiscover Sustainability, 2025
- Mechanical properties of alkali activated slag binder based concrete at elevated temperaturesDiscover Sustainability, 2025
- Impact of nano-silica and multi-walled carbon nanotubes on the fire resistance performance of rubberized concreteJournal of Building Pathology and Rehabilitation, 2025
- Mechanical performance of fiber reinforced concrete incorporating rice husk ash and brick aggregateInnovative Infrastructure Solutions, 2025
- Banana leaf ash as sustainable alternative raw material for the production of concrete: a reviewDiscover Materials, 2025
- An overview of the use and process for enhancing the pozzolanic performance of industrial and agricultural wastes in concreteDiscover Applied Sciences, 2025
- Mechanical and micro‐characterization of alkali‐activated concrete under high‐temperature exposureStructural Concrete, 2024
- Mechanical performance of fiber-reinforced concrete incorporating rice husk ash and recycled aggregatesJournal of Building Pathology and Rehabilitation, 2024
- Influence of nano silica and crumb rubber on the physical and durability characteristics of concreteMultiscale and Multidisciplinary Modeling, Experiments and Design, 2024
- Utilization of sawdust composites in construction—a reviewSN Applied Sciences, 2023