Comparison of fit accuracy between conventional and CAD/CAM‐fabricated band–loop space maintainers
- 4 February 2022
- journal article
- research article
- Published by Wiley in International Journal of Paediatric Dentistry
- Vol. 32 (5) , 764-771
Abstract
Aim: The aim of this in vitro study was to evaluate the band fit of metallic band–loop space maintainers fabricated by conventional and 3D printing technologies for clinical applications.Design: Sixteen digital intraoral impressions were selected, and resin models were printed with a 3D printer. Forty band–loop space maintainers were fabricated (20 each for both the conventional and digital groups). To evaluate the band fit of conventional and CAD/CAM‐fabricated space maintainers, cement space was visualized with low‐viscosity condensation silicone material on resin models. Digital evaluation was carried out using dual scan method by superimposing two scans of resin models covered with or without a silicone layer on the abutment tooth. The mean quadratic deviation (root mean square, RMS) was calculated. The RMS values between the groups were evaluated with Student's t test. Statistical significance was set at p < .05.Results: No statistical significance was found between the conventional and digital groups (p = .56).Conclusions: Within the limitations of this study, the band fit of conventional and CAD/CAM‐fabricated space maintainers had no difference. Future research into CAD/CAM‐fabricated appliances from different perspectives such as fracture strength and patient comfort is warranted.Keywords
This publication has 28 references indexed in Scilit:
- Trueness of milled prostheses according to number of ball-end mill bursThe Journal of Prosthetic Dentistry, 2016
- Comparison of the marginal fit of lithium disilicate crowns fabricated with CAD/CAM technology by using conventional impressions and two intraoral digital scannersThe Journal of Prosthetic Dentistry, 2015
- Micro-computed tomography evaluation of marginal fit of lithium disilicate crowns fabricated by using chairside CAD/CAM systems or the heat-pressing techniqueThe Journal of Prosthetic Dentistry, 2014
- 3D and 2D Marginal Fit of Pressed and CAD/CAM Lithium Disilicate Crowns Made from Digital and Conventional ImpressionsJournal of Prosthodontics, 2014
- A systematic review of CAD/CAM fit restoration evaluationsJournal of Oral Rehabilitation, 2014
- Banded vs Bonded Space Maintainers: Finding Better Way OutInternational Journal of Clinical Pediatric Dentistry, 2014
- ′Metal to resin′: A comparative evaluation of conventional band and loop space maintainer with the fiber reinforced composite resin space maintainer in childrenJournal of Indian Society of Pedodontics and Preventive Dentistry, 2014
- The Use of CAD/CAM in DentistryDental Clinics of North America, 2011
- A review of dental CAD/CAM: current status and future perspectives from 20 years of experienceDental Materials Journal, 2009
- Computer aided analysis of digitized dental stone replicas by dental CAD/CAM technologyDental Materials, 2008