The Effect of ZDDP Additive in CVT Fluid on Increasing Friction Coefficient between Belt Elements and Pulleys of Belt-Drive Continuously Variable Transmissions
Authors:
- 1 January 2000
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 43 (2) , 229-236
Abstract
This paper discusses the effect of the zinc-dialkyldithiophosphate (ZDDP) additive on increasing the friction obtained at the sliding interfaces between the elements and the pulleys of a belt-drive continuously variable transmission (B-CVT). Rig tests were performed with different types of CVT fluid to verify the effect of the ZDDP additive. The effect of surface roughness on film formation was also examined. The ZDDP additive increases the friction coefficient at the interfaces due to a film adsorbed on the sliding surface. A quantitative correlation was seen between the amount of Zn contained in the film and the friction coefficient as a measure of the B-CVT torque capacity. Under boundary conditions, the friction coefficient between the belt elements and the pulleys decreased as the amount of Zn was reduced due to oil degradation. Among the elements of the ZDDP additive and Ca phenate detergent, only the Zn concentration showed a correlation with the friction coefficient, which is attributed to the fact that the film contained Zn generated from the ZDDP additive.Keywords
This publication has 8 references indexed in Scilit:
- A Study on the Torque Capacity of a Metal Pushing V-Belt for CVTsSAE International Journal of Advances and Current Practices in Mobility, 1998
- The Effect of Belt-Drive CVT Fluid on the Friction Coefficient Between Metal ComponentsSAE International Journal of Advances and Current Practices in Mobility, 1997
- Application of soft X-ray absorption spectroscopy in chemical characterization of antiwear films generated by ZDDP Part I: the effects of physical parametersWear, 1997
- Friction Behaviour of ZDDP Films in the Mixed, Boundary/EHD RegimeSAE International Journal of Advances and Current Practices in Mobility, 1996
- The composition of lubricant-derived surface layers formed in a lubricated cam/tappet contact II. Effects of adding overbased detergent and dispersant to a simple ZDTP solutionTribology International, 1995
- A Study of a Metal Pushing V-Belt Type CVT-Part 1: Relation Between Transmitted Torque and Pulley ThrustSAE International Journal of Advances and Current Practices in Mobility, 1993
- Films formed by antiwear additives and their incidence in wear and scuffingWear, 1987
- Mechanism of boundary lubrication with zinc dithiophosphateWear, 1979