Mechanism and Characteristics of Humidity Sensing with Polyvinyl Alcohol-Coated Fiber Surface Plasmon Resonance Sensor
Open Access
Abstract
A surface plasmon resonance (SPR) sensor based on a side-polished single mode fiber coated with polyvinyl alcohol (PVA) is demonstrated for relative humidity (RH) sensing. The SPR sensor exhibits a resonant dip in the transmission spectrum in ambient air after PVA film coating, and the resonant wavelength shifts to longer wavelengths as the thickness of the PVA film increases. When RH changes, the resonant dip of the sensor with different film-thicknesses exhibits interesting characteristics for optical spectrum evolution. For sensors with initial wavelengths between 550 nm and 750 nm, the resonant dip shifts to longer wavelengths with increasing RH. The averaged sensitivity increases firstly and then drops, and shows a maximal sensitivity of 1.01 nm/RH%. Once the initial wavelength of the SPR sensor exceeds 850 nm, an inflection point of the resonant wavelength shift can be observed with RH increasing, and the resonant dip shifts to shorter wavelengths for RH values exceeding this point, and sensitivity as high as −4.97 nm/RH% can be obtained in the experiment. The sensor is expected to have potential applications in highly sensitive and cost effective humidity sensing.Keywords
Funding Information
- National Natural Science Foundation of China (61675137, 61425007, 61635007)
- Natural Science Foundation of Guangdong Province (2015B010105007, 2014A030308007)
- Science and Technology Innovation Commission of Shenzhen (JCYJ20160307143501276, JCYJ20160307143716576, JCYJ20160427104925452)
- Open Fund of the Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications (Jinan University)
- Development and Reform Commission of Shenzhen Municipality foundation (none)
This publication has 30 references indexed in Scilit:
- Carbon-nanotube / Polyvinyl alcohol coated thin core fiber sensor for humidity measurementSensors and Actuators B: Chemical, 2018
- Improving the Sensitivity of Humidity Sensor Based on Mach-Zehnder Interferometer Coated with a MethylcelluloseInternational Journal of Optics, 2018
- Optical fiber humidity sensor based on the direct response of the polyimide filmApplied Optics, 2018
- Graphene-Oxide-Coated Long-Period Grating-Based Fiber Optic Sensor for Relative Humidity and External Refractive IndexJournal of Lightwave Technology, 2017
- Tungsten disulfide wrapped on micro fiber for enhanced humidity sensingOptical Materials Express, 2017
- An open-cavity Fabry-Perot interferometer with PVA coating for simultaneous measurement of relative humidity and temperatureSensors and Actuators B: Chemical, 2016
- A relative humidity sensing probe based on etched thin-core fiber coated with polyvinyl alcoholOptics Communications, 2015
- Humidity Sensor With a PVA-Coated Photonic Crystal Fiber InterferometerIEEE Sensors Journal, 2013
- Analysis of the Characteristics of PVA-Coated LPG-Based Sensors to Coating Thickness and Changes in the External Refractive IndexIEEE Sensors Journal, 2012
- Polyvinyl alcohol coated photonic crystal optical fiber sensor for humidity measurementSensors and Actuators B: Chemical, 2012