Finite element analysis for mechanical characterization of 4D inplane carbon/carbon composite with imperfect microstructure
Authors:
Open Access
- 1 March 2014
- journal article
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 11 (2) , 170-184
Abstract
Finite element mesh of multi-directional 4D carbon/carbon (C/C) composite was reconstructed from 2D images obtained by X-ray tomography. Thus, imperfections in the composite such as voids, misalignment and cross-section distortion of the fibre bundles were directly incorporated in the finite element mesh. 2D images of the composite were also used for the characterization of the porosity in the composite. The effect of these micro structural imperfections was studies by assuming perfect bonding at the bundle/matrix interface. The initial mechanical properties of the composite were obtained from unit cell analysis using asymptotic homogenization and moduli in x, y and z directions were 39, 25 and 44 GPa. However, matrix and bundle/matrix interfacial cracks were also clearly visible in the X-ray tomographic images. Later, the effects of debonding was incorporated by using frictional cohesive interaction at bundle/matrix interfaces and matrix cracking was modeled by degrading the elastic properties of matrix. Final, the response of the composite was studied under six individual load cases.Keywords
This publication has 13 references indexed in Scilit:
- Fiber bundle push-out test and image-based finite element simulation for 3D carbon/carbon compositesCarbon, 2012
- Comparative study of predictive FE methods for mechanical properties of nuclear compositesJournal of Nuclear Materials, 2009
- Boundary conditions for unit cells from periodic microstructures and their implicationsComposites Science and Technology, 2008
- Effect of architecture on mechanical properties of carbon/carbon compositesComposite Structures, 2008
- Computational homogenization of micro-structural damage due to frost in hardened cement pasteFinite Elements in Analysis and Design, 2008
- Material modeling of the CVI-infiltrated carbon felt II. Statistical study of the microstructure, numerical analysis and experimental validationComposites Science and Technology, 2006
- Combining interface damage and friction in a cohesive‐zone modelInternational Journal for Numerical Methods in Engineering, 2006
- Damage modeling at two scales for 4D carbon/carbon compositesComputers & Structures, 2000
- Carbon Carbon Composites: An Overview .Defence Science Journal, 1993
- Macroporosity and interface cracking in multi-directional carbon-carbonsCarbon, 1986