Abstract
Al2O3 has been shown to provide an outstanding passivation quality on p‐type surfaces after annealing at moderate temperatures (∼425 °C). However, most industrial silicon solar cells are based on printing technologies for metallization, including a high temperature firing step for the contact formation. To investigate the thermal stability of the Al2O3 passivation, symmetrical p and p+ np+ lifetime samples were coated with Al2O3 and exposed to typical firing processes at temperatures between 700 °C and 850 °C. Up to a firing temperature of 825 °C the Al2O3 passivation is shown to be stable on highly boron‐doped surfaces. An emitter saturation current density of ∼60 fA/cm2 could be measured for the p+ np+ samples, allowing a maximum open circuit voltage (Voc) >695 mV. The firing stability of the Al2O3 is an important step for the realization of an industrial n‐type silicon solar cell.
Keywords
Funding Information
  • German Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (0329849A “Th-ETA”)

This publication has 8 references indexed in Scilit: