Multi-Factor Statistical Analysis and Numerical Modeling of an Anode-Supported SOFC Fueled by Synthetic Diesel Using Taguchi Orthogonal Arrays
Authors:
- Alan Uriel Estrada-HerreraAlan Uriel Estrada-Herrera
- Ismael Urbina-SalasIsmael Urbina-Salas
- David Aaron Rodriguez-AlejandroDavid Aaron Rodriguez-Alejandro
- José de Jesús Ramírez-MinguelaJosé de Jesús Ramírez-Minguela
- Martin Valtierra-RodriguezMartin Valtierra-Rodriguez
- Francisco Elizalde-BlancasFEFrancisco Elizalde-Blancas
Open Access
- 29 April 2026
- journal article
- research article
- Published by MDPI AG in Technologies
- Vol. 14 (5) , 271
Abstract
The global transition toward carbon-neutral energy solutions has established Solid Oxide Fuel Cells (SOFCs) as a key technology for next-generation power generation. This work presents a comprehensive numerical study and multi-factor statistical analysis of an anode-supported SOFC fueled by synthetic diesel. A three-dimensional computational fluid dynamics model, validated against experimental data, was integrated with a Taguchi L27 orthogonal array to systematically evaluate the influence of six key parameters: temperature, fuel mass flow rate, operating pressure, current load, flow channel configuration, and methane molar fraction. Statistical analysis through the signal-to-noise ratio and analysis of variance identified the operating current as the most significant factor affecting cell voltage, followed by the fuel mass flow rate and temperature. The experiments showed that the highest levels of all factors (except for the current, which had the lowest level) maximize electrochemical performance while maintaining a steam-to-carbon ratio (S/C) within a range of 0.83 to 0.92, calculated based on total carbon content, ensuring sufficient humidification for internal reforming across all tested fuel compositions. Furthermore, a multiple linear regression model was developed as a computationally efficient surrogate, demonstrating exceptional predictive accuracy with an R2 of 0.9954 and a mean relative error of 1.76% across independent validation cases. These results provide a robust methodology for rapid design and sensitivity analysis of internal-reforming SOFCs, offering a precise tool for optimizing fuel utilization in high-temperature electrochemical systems.Keywords
This publication has 43 references indexed in Scilit:
- Optimizing steam-to-carbon and air-to-carbon ratios in internal autothermal reforming of a biogas-fed solid oxide fuel cell using the combination of computational fluid dynamics and artificial intelligenceEnergy Conversion and Management, 2025
- Principles and performance and types, advantages and disadvantages of fuel cells: A reviewCase Studies in Chemical and Environmental Engineering, 2024
- Navigating the future of solid oxide fuel cell: Comprehensive insights into fuel electrode related degradation mechanisms and mitigation strategiesAdvances in Colloid and Interface Science, 2024
- Energy and entropy study of a SOFC using biogas from different sources considering internal reforming of methaneInternational Journal of Heat and Mass Transfer, 2018
- Numerical simulation of the performance of solid oxide fuel cell with different flow channel geometriesEnergy, 2017
- Biomass gasification integrated with a solid oxide fuel cell and Stirling engineEnergy, 2014
- Microstructural modeling for prediction of transport properties and electrochemical performance in SOFC composite electrodesChemical Engineering Science, 2013
- Prediction of the performance of a solid oxide fuel cell fuelled with biosyngas: Influence of different steam-reforming reaction kinetic parametersInternational Journal of Hydrogen Energy, 2013
- Optimization of physical parameters of solid oxide fuel cell electrode using electrochemical modelKorean Journal of Chemical Engineering, 2011
- Parametric study of solid oxide fuel cell performanceEnergy Conversion and Management, 2007