The Effect of Gap Width on Premixed Flame Propagation in Non-adiabatic Closed Hele–Shaw Cells
- 6 April 2021
- journal article
- research article
- Published by Taylor & Francis in Combustion Science and Technology
- Vol. 194 (13) , 2793-2816
Abstract
The premixed flame propagation with conductive heat loss in millimeter-scale narrow closed cells of different gap widths is investigated experimentally and numerically. The flame evolution is observed in a disc-shaped cell of which the width is varied from 2.0 mm to 5.0 mm. A non-monotonic relation between the flame propagation velocity and the gap width is found. Time-dependent numerical results exhibit good agreement with the experimental data and indicate that the flame behaviors are highly sensitive to the gap width. Since gap downsizing leads to significant heat loss and viscous friction from the wall, the propagation velocity will drop to almost laminar flame speed halfway for 2.0 mm width. For larger gaps, the flame propagation velocity is determined by the combined effect of the flame straining and the conductive heat loss. The former increases the flame front area while the latter strongly weakens the flame distortion. The trade-off of them yields the non-monotonic relation and an optimal width of 3.0 mm.Keywords
Funding Information
- National Basic Research Program of China (2014CB239601)
- National Natural Science Foundation of China (51506204)
- Foundation of CAS Key Laboratory of Renewable Energy (y907j91001)
This publication has 41 references indexed in Scilit:
- Heat recirculation effects on flame propagation and flame structure in a mesoscale tubeCombustion Theory and Modelling, 2012
- Flame speed predictions in planar micro/mesoscale combustors with conjugate heat transferCombustion and Flame, 2011
- Reaction propagation modes in millimeter-scale tubes for ethylene/oxygen mixturesProceedings of the Combustion Institute, 2011
- Dynamics of premixed flames in a narrow channel with a step-wise wall temperatureCombustion and Flame, 2009
- Flame acceleration in the early stages of burning in tubesCombustion and Flame, 2007
- EFFECTS OF CHANNEL WIDTH AND LEWIS NUMBER ON THE MULTIPLE FLAME REGIMES AND PROPAGATION LIMITS IN MESOSCALECombustion Science and Technology, 2006
- The role of structural heat exchange and heat loss in the design of efficient silicon micro-combustorsProceedings of the Combustion Institute, 2005
- Influence of conductive heat-losses on the propagation of premixed flames in channelsCombustion and Flame, 2002
- Effect of Lewis number on flame front fragmentation in narrow closed channelsCombustion and Flame, 2000
- Flame quenching by a cold wallCombustion and Flame, 1983