Pulsed Eddy Current Inspection of Wall Loss in Steam Generator Trefoil Broach Supports
Authors:
- 23 November 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 17 (2) , 444-449
Abstract
Inspection for corrosion in steam generator (SG) tube support structures is a significant component of monitoring SG condition, since support degradation can lead to SG tube flaws, and thereby further SG deterioration. A pulsed eddy current probe was developed to augment SG inspection at carbon steel trefoil broach supports. The probe demonstrated capability to measure far side wall loss as small as 20% of the original 2.7-mm-thick broach support ligament from within the Alloy 800 SG tube. A power law fit of the data was found to describe signal variation at later times under conditions of varying wall thickness and lift-off. The associated power law exponent varied linearly with wall thickness and was observed to be largely independent of lift-off and angular orientation of the probe, identifying it as a potential parameter for ligament wall thickness monitoring. Voltage response integrated over time also provided a low-noise means of measuring the wall loss when lift-off variation and misalignment were not present.Keywords
Funding Information
- University Network of Excellence in Nuclear Engineering
- Natural Sciences and Engineering Research Council of Canada
This publication has 18 references indexed in Scilit:
- Pulsed Eddy Current Detection of Cracks in Multilayer Aluminum Lap JointsIEEE Sensors Journal, 2014
- Real Time Pulsed Eddy Current Detection of Cracks in F/A-18 Inner Wing Spar Using Discriminant Separation of Modified Principal Components Analysis ScoresIEEE Sensors Journal, 2013
- Assessment of wall thinning in insulated ferromagnetic pipes using the time-to-peak of differential pulsed eddy-current testing signalsNDT & E International, 2012
- Steel Corrosion Characterization Using Pulsed Eddy Current SystemsIEEE Sensors Journal, 2012
- Advances in transient (pulsed) eddy current for inspection of multi-layer aluminum structures in the presence of ferrous fastenersAIP Conference Proceedings, 2012
- Dual Core Differential Pulsed Eddy Current Probe to Detect the Wall Thickness Variation in an Insulated Stainless Steel PipeJournal of Magnetics, 2010
- Feature extraction and selection for defect classification of pulsed eddy current NDTNDT & E International, 2008
- Fretting fatigue and wear damage of structural components in nuclear power stations—Fitness for service and life management perspectiveTribology International, 2006
- Pulsed Eddy-Current Nondestructive Testing of Ferromagnetic TubesIEEE Transactions on Instrumentation and Measurement, 2004
- Overview of steam generator tube degradation and integrity issuesNuclear Engineering and Design, 1999