Influence of temperature and humidity on Portland cement mortar resistivity monitored with inner sensors
- 8 April 2009
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 60 (4) , 294-299
Abstract
Concrete resistivity is directly related to relative humidity (RH) and is also affected by temperature. In this paper, a theoretical discussion about how these two factors affect resistivities of concrete and mortar is provided. Moreover, experimental results on sensorized mortar probes are presented and correlated to analytical models of temperature and humidity influences. All measurements were performed under controlled conditions. Temperature, RH, and resistivity were measured simultaneously in a particular zone of the probes. Temperature scanning was performed over short periods of time (approximately 1 h) and the probes were covered with waterproof paraffin each time for constant humidity content. This was feasible as all sensors were embedded. Water contents were ensured during the experiment by weighting the probes. Conclusions on the applicability of these techniques, their advantages, and limitations, and correlation to Archie and Arrhenius laws of the results are made.Keywords
This publication has 24 references indexed in Scilit:
- Water vapour sorption experiments on hardened cementitious materialsCement and Concrete Research, 2007
- Modelling reinforcement corrosion – usability of a factorial approach for modelling resistivity of concreteMaterials and Corrosion, 2006
- Study of the Joule effect on rapid chloride permeability values and evaluation of related electrical properties of concretesCement and Concrete Research, 2004
- Utilisation of electrical resistance method for the evaluation of the state of steel reinforcement in concrete and the rate of its corrosionConstruction and Building Materials, 2000
- Effect of the Interfacial Transition Zone on the Conductivity of Portland Cement MortarsJournal of the American Ceramic Society, 2000
- Influence of relative humidity and temperature on-site corrosion ratesMateriales de Construcción, 1998
- Effect of moisture, chloride and sulphate contamination on the electrical resistivity of Portland cement concreteConstruction and Building Materials, 1996
- Effects of Temperature on Conduction and Polarization in Portland Cement MortarJournal of the American Ceramic Society, 1995
- The conduction of electricity through concreteMagazine of Concrete Research, 1981
- Über eine Beziehung zwischen elektrischer Leitfähigkeit und TemperaturBerichte der Bunsengesellschaft für physikalische Chemie, 1908