The curing deformation mechanism and deformation control methods of honeycomb panels
- 12 September 2026
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Abstract
Controlling warpage during hot-press curing of aluminum honeycomb panels is crucial for dimensional accuracy and structural performance. This deformation is mainly caused by uneven temperature distribution and the resulting thermal mismatch between the upper and lower face-sheets. To address this issue, this study investigates the influence of non-woven fabric thickness on the thermal deformation behavior of the panels. A thermos-mechanical finite element model was established based on sandwich panel theory, and an equivalent mechanical model of the honeycomb core was developed. Combined with autoclave experiments, the evolution of the temperature field and deformation field under different non-woven fabric thicknesses was systematically analyzed. The results indicate that the non-woven fabric layer delays the heating of the upper face-sheet through its thermal resistance, thereby improving temperature uniformity between the upper and lower face-sheets. As the fabric thickness increased from 0 to 7 mm, the flatness of the panel continuously improved, with maximum deformation reduced by 24.1%. However, a clear diminishing marginal effect was observed: the improvement in deformation suppression became notably smaller in the 5–7 mm thickness range. Experimental data agreed well with simulations, and the maximum deformation prediction error remained within 5%, validating the proposed “non-woven fabric thickness – temperature field – deformation field” mechanism. This study provides a theoretical basis for selecting the non-woven fabric thickness in the manufacturing process, suggesting that a thickness around 5 mm offers the best balance between material cost and quality control.Keywords
This publication has 26 references indexed in Scilit:
- An analytical approach for nonlinear global buckling behavior of sandwich cylindrical panels with multilayer corrugated CNT-reinforced core in thermal environmentEngineering Structures, 2025
- Mechanical properties of carbon fiber pyramid-honeycomb with shear strengthening designComposites Science and Technology, 2025
- Equivalent model establishment based on the equivalent mechanical parameters optimization considering the modal behavior for curved concave hexagonal honeycomb sandwich structuresComposite Structures, 2025
- Thermal deformation monitoring of large-scale composite honeycomb spaceborne antennas with limited strain measurementsAerospace Science and Technology, 2024
- Feasibility study on additive-manufactured honeycomb sandwich structural solutions for a Fast Patrol VesselComposite Structures, 2024
- Multiscale homogenization of aluminum honeycomb structures: Thermal analysis with orthotropic representative volume element and finite element methodHeliyon, 2024
- Parameter optimization of bidirectional re-entrant auxetic honeycomb metamaterial based on genetic algorithmComposite Structures, 2021
- Process-induced deformation in U-shaped honeycomb aerospace composite structuresComposite Structures, 2020
- Strength, stiffness, and panel peeling strength of carbon fiber-reinforced composite sandwich structures with aluminum honeycomb cores for vehicle bodyComposite Structures, 2018
- WRINKLING AND OTHER FORMS OF LOCAL INSTABILITY1969