Structure and mechanism of the deformation of Grade 2 titanium in plastometric studies
- 8 March 2018
- journal article
- research article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 35 (3) , 253-259
Abstract
In this paper, the results of plastometric and material studies on grade 2 titanium are presented. Cylindrical titanium samples were compressed at elevated temperatures on a Gleeble thermo-mechanical simulator. The process was captured in the form of stress-strain diagrams. Then, for the chosen-deformed samples, structural studies were performed on a digital light microscope. On the basis of the results, it was possible to determine the plastometric processing conditions that are most suitable for the fragmentation of the grains of the tested titanium. In order to find optimal processing parameters, it was also important to describe the plastometric process through the appropriate constitutive equations. Material constants in this equation were determined on the basis of a hyperbolic sinusoidal equation. This paper is part of a thematic issue on Titanium.Keywords
This publication has 20 references indexed in Scilit:
- Simultaneously increasing both strength and ductility of Fe-Mn-C twinning-induced plasticity steel via Cr/Mo alloyingScripta Materialia, 2017
- A review of dynamic recrystallization phenomena in metallic materialsMaterials & Design, 2016
- The identification of dynamic recrystallization and constitutive modeling during hot deformation of Ti55511 titanium alloyMaterials & Design, 2015
- New constitutive model for high-temperature deformation behavior of inconel 718 superalloyMaterials & Design (1980-2015), 2015
- Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditionsProgress in Materials Science, 2014
- Microstructure study and constitutive modeling of Ti–6Al–4V alloy at elevated temperaturesMaterials & Design (1980-2015), 2014
- Flow behavior modeling of a Ti–6Al–7Nb biomedical alloy during manufacturing at elevated temperaturesMaterials & Design (1980-2015), 2013
- A critical review of experimental results and constitutive descriptions for metals and alloys in hot workingMaterials & Design (1980-2015), 2011
- Special features of the distribution of interstitial elements in cast and deformed titanium pseudo-α-alloyMetal Science and Heat Treatment, 1999
- Plastic deformation and fracture behaviour of Ti–6Al–4V alloy loaded with high strain rate under various temperaturesMaterials Science and Engineering: A, 1998