Bioequivalent and Non-Aqueous Polyurethane Gel for Ultrasound Phantom
- 20 September 2022
- journal article
- research article
- Published by Taylor & Francis in JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
- Vol. 55 (9) , 300-306
Abstract
The acoustic properties of conventional tissue-mimicking materials (TMMs) used as phantoms for ultrasonic diagnostic equipment are a sound speed of approximately 1540 m/s and an attenuation coefficient of approximately 0.5 dB/(cm·MHz). Although these values agree well with those of the human body, the acoustic properties of conventional TMMs deteriorate over time due to water desorption. Polyurethane (PU) gels are expected to be highly durable with a long lifetime because they do not contain water. However, the sound speed of conventional PU gels is approximately 1430 m/s, which is slower than 1540 m/s required for TMMs. This study develops a TMM using PU gel with acoustic properties similar to those of human tissue. A PU gel is prepared using a randomly copolymerized polyol of poly-tetramethylene-ether glycol and polyethylene glycol and propylene carbonate as a plasticizer. The developed gel has a sound speed of approximately 1540 m/s and an attenuation coefficient of approximately 0.5 dB/(cm·MHz), which are equivalent to the average values of human soft tissue.Keywords
This publication has 31 references indexed in Scilit:
- A Tissue Mimicking Polyacrylamide Hydrogel Phantom for Visualizing Thermal Lesions Generated by High Intensity Focused UltrasoundUltrasound in Medicine & Biology, 2013
- The Speed of Sound and Attenuation of an IEC Agar-Based Tissue-Mimicking Material for High Frequency Ultrasound ApplicationsUltrasound in Medicine & Biology, 2012
- Action of hydrocarbon and ester plasticizer in urethane elastomer for sealing purposesJournal of Applied Polymer Science, 2001
- Characterization of urethane functional hindered amine light stabilizersPolymer Degradation and Stability, 1993
- Polyurethane elastomersProgress in Polymer Science, 1991
- Urethane Systems Reactivity MeasurementJournal of Cellular Plastics, 1985
- Properties of polyether-polyurethane block copolymers: effects of hard segment length distributionMacromolecules, 1985
- A method for estimating both the solubility parameters and molar volumes of liquidsPolymer Engineering & Science, 1974
- Rapid Curing of Urethane ElastomersI&EC Product Research and Development, 1962
- Relative Velocities of Reaction of Alcohols with Phenyl IsocyanateJournal of the American Chemical Society, 1934