Reversibility of the Mullins effect for extending the life of rubber components
- 7 March 2018
- journal article
- research article
- Published by SAGE Publications in Plastics, Rubber and Composites: Macromolecular Engineering
- Vol. 48 (1) , 24-31
Abstract
This paper investigates the recovery of the Mullins effect by heat-treatment of predeformed (300% tensile strain) carbon-black filled ethylene-propylene-diene rubber (EPDM) in an air-circulating oven. The tensile response was measured, and the secant modulus at 100% strain, energy to deform to 300% strain, ultimate tensile strength, strain to failure and permanent deformation were compared to undeformed specimens subjected to the same heat-treatments, 3–24 h at temperatures of 60–80°C. Recovery of properties is dependent on time and temperature of treatment, increasing with longer times and higher temperatures. Recovery of secant modulus follows time-temperature superposition (TTS) with an activation enthalpy of 111 kJ mol−1; TTS is shown to be applicable to the other measures, probably because of additional cure in the rubber resulting from the heat-treatment. Treatments under vacuum led to similar effects as in an air-circulating oven.Keywords
This publication has 20 references indexed in Scilit:
- A method for the determination and correction of the effect of thermal degradation on the viscoelastic properties of degradable polymersPolymer Degradation and Stability, 2016
- Vulcanization Kinetics and Mechanical Properties of Ethylene Propylene Diene Monomer Thermal InsulationBulletin of Chemical Reaction Engineering & Catalysis, 2015
- The role of deformation history on stress relaxation and stress memory of filled rubberPolymer Testing, 2014
- Effects of stretch induced softening to the free recovery behavior of shape memory polymer compositesPolymer, 2014
- Physical interpretation of the Mullins softening in a carbon-black filled SBRPolymer, 2014
- Viscoelastic melt rheology and time–temperature superposition of polycarbonate–multi-walled carbon nanotube nanocompositesRheologica Acta, 2013
- A constitutive model for stress–strain response and mullins effect in filled elastomersJournal of Applied Polymer Science, 2012
- Characterization of NBR/bentonite composites: vulcanization kinetics and rheometric and mechanical propertiesPolymer Bulletin, 2011
- A review on the Mullins effectEuropean Polymer Journal, 2009
- Molecular basis for the mullins effectJournal of Applied Polymer Science, 1960