A Novel Impact Rotary–Linear Motor Based on Decomposed Screw-Type Motion of Piezoelectric Actuator
Open Access
- 4 December 2018
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 8 (12) , 2492
Abstract
A novel impact two-degree-of-freedom (2-DOF) motor based on the decomposed screw-type motion of a piezoelectric actuator (PA) has been proposed. The fabricated prototype motor has a maximum diameter of 15 mm and a length of 100 mm which can produce a maximum torsional angle of about 1000 μrad and a maximum longitudinal displacement of about 1.03 μm under a saw-shaped driving voltage with 720 Vp-p (peak-to-peak driving voltage). When the axial prepressure generated by the spring is about 1N and the radial prepressure generated by the snap ring is about 14 N, the fabricated motor realizes rotary motion with the driving frequency from 200 Hz to 4 kHz. When the axial prepressure generated by the spring is about 11.7 N and the radial prepressure generated by the snap ring is about 21.1 N, the fabricated motor realizes linear motion with the driving frequency from 2 kHz to 11 kHz. In the experiments, the prototype motor can achieve 9.9 × 105 μrad/s rotary velocity at 2 kHz and it can achieve 2.4 mm/s linear velocity at 11 kHz under the driving voltage of 720 Vp-p.Keywords
Funding Information
- National Natural Science Foundation of China (51775157, 51875165)
- Project 111 (No. B12019)
- National Key Scientific Apparatus Development Project (Grant No.2013YQ220893)
- Natural Science Foundation of Anhui Province (No. 1608085ME108)
This publication has 30 references indexed in Scilit:
- A Dual Stage Low Power Converter Driving for Piezoelectric Actuator Applied in Micro Mobile RobotApplied Sciences, 2018
- Development and experiment evaluation of an inertial piezoelectric actuator using bending-bending hybrid modesSensors and Actuators A: Physical, 2018
- The Development of Piezo-Driven Tools for Cellular PiercingApplied Sciences, 2016
- High-velocity operation of piezoelectric inertia motors: experimental validationArchive of Applied Mechanics, 2014
- Modeling and experimental validation of new two degree-of-freedom piezoelectric actuatorsMechatronics, 2013
- Construction and verification of a linear-rotary microstage with a millimeter-scale rangeInternational Journal of Precision Engineering and Manufacturing, 2013
- Three-degree-of-freedom ultrasonic motor using a 5-mm-diameter piezoelectric ceramic tubeIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2013
- A new inertial piezoelectric rotary actuator based on changing the normal pressureMicrosystem Technologies, 2012
- An impact rotary motor based on a fiber torsional piezoelectric actuatorReview of Scientific Instruments, 2009
- Development of a piezoelectric multi-axis stage based on stick-and-clamping actuation technologySmart Materials and Structures, 2007