Preparation and properties of vinylphenyl-silicone resins and their application in LED packaging
Authors:
- 19 July 2016
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (76) , 71924-71933
Abstract
Three types of vinylphenyl silicone resins, vinyl-terminated, vinyl-capped, vinyl-terminated and vinyl-capped silicone resins, were synthesized through co-condensation and poly-condensation methods, and were characterized by nuclear magnetic resonance spectroscopy (1H NMR, 29Si NMR) as well as Fourier transform infrared spectroscopy (FTIR). The cured phenyl-silicone resins were characterized by thermogravimetric analysis (TGA), a electron universal testing machine at different temperatures, spectrophotometry, and transmission electron microscopy (TEM). The TGA results indicated that the thermal stability of cured phenyl-silicone resins prepared from the vinyl-terminated silicone reins was better than that of vinyl-capped silicone resin. In addition, all of these cured phenyl-silicone resins exhibited an onset decomposition temperature higher than 500 °C. The values of elongation at break were above 20% at −40 °C, indicating that these materials possessed a certain toughness at a relatively low temperature. The results of TEM revealed that the materials with a higher homogeneity degree of morphological structure could obtain 98.7% transmittance at a wavelength of 680 nm. Reliability tests, including a dye test, thermal shock test, and wet and high temperature operation life (WHTOL) test, demonstrated a wide range of applications of these materials in LED packaging.Keywords
This publication has 31 references indexed in Scilit:
- Mean-time-to-failure evaluations of encapsulation materials for LED package in accelerated thermal testsMicroelectronics Reliability, 2012
- Thermally resistant UV-curable epoxy–siloxane hybrid materials for light emitting diode (LED) encapsulationJournal of Materials Chemistry, 2012
- High Refractive Index Polymers Based on Thiol–Ene Cross-Linking Using Polarizable Inorganic/Organic MonomersMacromolecules, 2012
- Effects of silphenylene units on the thermal stability of silicone resinsPolymer Degradation and Stability, 2011
- Morphological and optical behavior of thermoset matrix composites varying both polystyrene-block-poly(ethylene oxide) and TiO2 nanoparticle contentPolymer, 2011
- Tenth PAT symposium, Jerusalem, 2009: in honor of Professor Menachem Lewin's 90th birthdayPolymers for Advanced Technologies, 2010
- Thermally Stable Transparent Sol−Gel Based Siloxane Hybrid Material with High Refractive Index for Light Emitting Diode (LED) EncapsulationChemistry of Materials, 2010
- Highly Transparent and Refractive Polyimides with Controlled Molecular Structure by Chlorine Side GroupsMacromolecules, 2009
- Mechanism and thermal effect of delamination in light-emitting diode packagesMicroelectronics Journal, 2007
- Characterization of plastic encapsulant materials as a baseline for quality assessment and reliability testingMicroelectronics Reliability, 2002