Corrosion and Thermal Stability of CrMnFeNi High Entropy Alloy in Molten FLiBe Salt
Open Access
- 12 December 2019
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-10
Abstract
The corrosion behavior of the FCC Cr18Mn27Fe27.5Ni27.5 high entropy alloy (HEA) after exposure to molten FLiBe salt at 700 °C for 1000 hours, has been investigated. Results show that the HEA lost a higher mass compared to the reference 316 H stainless steel due to the dissolution of Mn into the molten salt. The loss of Mn from the alloy appeared to discourage the dissolution of Cr in the molten fluoride salts which is widely recognized as the mechanism of corrosion degradation. Thermal exposure at 700 °C for 1000 hours also led to the precipitation of an additional BCC phase Cr67Fe13Mn18.5Ni1.5, which was confirmed by CALPHAD predictions.Keywords
Funding Information
- DOE
This publication has 35 references indexed in Scilit:
- Microstructures and properties of high-entropy alloysProgress in Materials Science, 2014
- Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloysActa Materialia, 2013
- Corrosion in Molten Salts2013
- Molten salt induced corrosion of Inconel 625 superalloy in PbSO4–Pb3O4–PbCl2–Fe2O3–ZnO environmentCorrosion Science, 2012
- Lab and field investigations on localized corrosion of casingMaterials and Corrosion, 2010
- Materials corrosion in molten LiF–NaF–KF saltJournal of Fluorine Chemistry, 2009
- Microstructural development in equiatomic multicomponent alloysMaterials Science and Engineering: A, 2004
- Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and OutcomesAdvanced Engineering Materials, 2004
- Phase diagram calculation: past, present and futureProgress in Materials Science, 2004
- Neutron irradiation of FeMn, FeCrMn and FeCrNi alloys and an explanation of their differences in swelling behaviorJournal of Nuclear Materials, 1987