Polarization-dependent curvature sensor based on an in-fiber Mach-Zehnder interferometer with a difference arithmetic demodulation method
- 25 June 2012
- journal article
- Published by Optica Publishing Group in Optics Express
- Vol. 20 (14) , 15406-15417
Abstract
A curvature sensor based on a polarization-dependent in-fiber Mach-Zehnder interferometer (MZI) is proposed. The MZI is fabricated by core-offset fusion splicing one section of polarization maintaining fiber (PMF) between two single mode fibers (SMFs). Two independent interference patterns corresponding to the two orthogonal polarization modes for the PMF are obtained. The couple efficiency between the core mode and the cladding mode decreased with the increasing of the bending on the MZI part. The curvature variation on the MZI part can be obtained by detecting the fringe visibility of the interference patterns. A difference arithmetic demodulation method is used to reduce the effects of the light source power fluctuations and temperature cross-sensitivity. Experimental results show that maximal sensitivity of −0.882 dB/m−1 is obtained under a measurement range of 0.1 to 0.35 m−1 for the curvature sensor. With the use of difference arithmetic demodulation method, the temperature-curvature cross-sensitivity and light source power fluctuations effects on the proposed sensor are decreased by 94% and 91%, respectively.Keywords
This publication has 18 references indexed in Scilit:
- All-fiber Mach-Zehnder interferometers for sensing applicationsOptics Express, 2012
- Simultaneous measurement of curvature and temperature based on PCF-based interferometer and fiber Bragg gratingOptics Communications, 2011
- Simultaneous measurement of curvature and strain using a suspended multicore fiberOptics Letters, 2011
- Highly sensitive bend sensor based on Mach–Zehnder interferometer using photonic crystal fiberOptics Communications, 2011
- Mach–Zehnder Photonic Crystal Interferometer in Cavity Ring-Down Loop for Curvature MeasurementIEEE Photonics Technology Letters, 2011
- Tapered fiber Mach–Zehnder interferometer for simultaneous measurement of refractive index and temperatureApplied Physics Letters, 2009
- Fiber Inline Core–Cladding-Mode Mach–Zehnder Interferometer Fabricated by Two-Point CO$_{2}$ Laser IrradiationsIEEE Photonics Technology Letters, 2009
- All-fiber Mach-Zehnder curvature sensor based on multimode interference combined with a long-period gratingOptics Letters, 2007
- All-fiber Mach-Zehnder type interferometers formed in photonic crystal fiberOptics Express, 2007
- Photonic‐crystal‐fiber‐based Mach–Zehnder interferometer using long‐period gratingsMicrowave and Optical Technology Letters, 2006