Compression behavior of glass-fiber-reinforced and pure polyurethane foams at negative temperatures down to cryogenic ones
- 28 April 2013
- journal article
- research article
- Published by SAGE Publications in Journal of Cellular Plastics
- Vol. 49 (3) , 209-222
Abstract
This work experimentally addresses the effects of negative temperature on compression behavior of non-reinforced and glass-fiber-reinforced polyurethane foams. Monotonic, creep and cyclic compression tests are performed down to cryogenic temperatures. In this range, temperature is shown to influence both the Young's modulus and the yield stress, which increase with decreasing temperature. The influence is nearly the same on either reinforced or unreinforced foams, mostly due to the preferential orientation of fibers perpendicular to the compression direction. Among contributions that could explain low temperature deformation, viscoelasticity and damage are focused on. The former contribution was investigated by creep and recovery tests, which showed that a non-negligible part of the compression strain could be recovered. The latter contribution was studied from cyclic tests and scanning electron microscopy observations. Damage analyses showed that a non-negligible initial damage issued from cooling down itself prior to mechanical loading. During further compression, a decrease of the cyclic modulus was observed, significantly before the yield stress at low temperature. Generalized brittle fracture of cavity walls was suggested from micrographs. As a conclusion, damage and viscous phenomena seem to coexist down to cryogenic temperatures.Keywords
This publication has 15 references indexed in Scilit:
- Size effect in glass fiber reinforced and pure polyurethane foams in monotonic and creep compressionJournal of Cellular Plastics, 2012
- Size effect on stress–strain relation of neat polyurethane foamComposites Part B: Engineering, 2008
- Mechanical properties of high density polyurethane foams: I. Effect of the densityComposites Science and Technology, 2006
- Long-term Tensile and Compressive Behavior of Polymer FoamsJournal of Cellular Plastics, 2006
- Size effects in the constrained deformation of metallic foamsJournal of the Mechanics and Physics of Solids, 2002
- Plastic deformation modes in rigid polyurethane foam under static loadingInternational Journal of Solids and Structures, 2001
- Experimental analysis of deformation mechanisms in a closed-cell aluminum alloy foamJournal of the Mechanics and Physics of Solids, 2000
- Analyse mécanique dynamique d’élastomères thermoplastiques polyuréthaneEuropean Polymer Journal, 1998
- Polyurethane rigid foam, a proven thermal insulating material for applications between +130°C and −196°CCryogenics, 1998
- Structure-property relationships of flexible polyurethane foamsPolymer, 1997