Analysis of the impact of online identification on model predictive current control applied to permanent magnet synchronous motors
Open Access
- 1 May 2017
- journal article
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 11 (5) , 864-873
Abstract
Model predictive control (MPC) is a model‐based control strategy that introduces many advantages but also some drawbacks. The biggest challenge that faces MPC controller is its sensitivity towards parametric variation. This study aims to robustify MPCs by adding a least mean square (LMS) identification algorithm within their structure. The feasibility of this method is tested on a simple example which is the MPC current control of a permanent magnet synchronous motor driven by a two‐level power converter. Many tests are firstly performed without including inside the MPC algorithms the LMS online tuning procedure. These tests are later compared with the ones obtained with the same control technique but where the identification algorithm is turned on. Results clearly show all the benefits of using this approach on the controller performances.Keywords
This publication has 19 references indexed in Scilit:
- Steady-state optimization and nonlinear model-predictive control of a reactive distillation process using the software platform do-mpc2016
- Cascaded Dual-Model-Predictive Control of an Active Front-End RectifierIEEE Transactions on Industrial Electronics, 2016
- Flux-weakening control research of IPMSM considering magnetic saturation2015
- Evaluation of the new generation of system-on-chip platforms for controlling electrical systems2015
- Sensitivity to electrical parameter variations of Predictive Current Control in multiphase drives2013
- Model-Free Predictive Current Control for Interior Permanent-Magnet Synchronous Motor Drives Based on Current Difference Detection TechniqueIEEE Transactions on Industrial Electronics, 2013
- Parameter Identification of Multiphase Induction Machines With Distributed Windings—Part 2: Time-Domain TechniquesIEEE Transactions on Energy Conversion, 2012
- State of the Art of Finite Control Set Model Predictive Control in Power ElectronicsIEEE Transactions on Industrial Informatics, 2012
- Model predictive control: Review of the three decades of developmentInternational Journal of Control, Automation, and Systems, 2011
- FPGA-based ControllersIEEE Industrial Electronics Magazine, 2011