Three-Dimensional Failure Analysis of Plain Weave Textile Composites Using a Global/Local Finite Element Method
Authors:
- 1 June 1996
- journal article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 30 (9) , 984-1003
Abstract
Textile composites are known to have improved out-of-plane properties and impact resistance. However, detailed analysis of textile composites is very difficult to perform due to the geometric complexity. In the present study, a practical computational procedure based on a global/local finite element method was developed for detailed analysis of textile composites. This procedure utilizes two problem levels: global and local levels. At the global level, an initial global solution was obtained using a coarse global mesh. At the local level, a small portion of the textile composite was modeled with a refined local mesh. For the global analysis, macroelements were used since the use of effective engineering properties are not in general accurate for the larger microstructural scale found in textile composites. Results indicated that the failure behavior of plain weave textile composites was sensitive to the fiber bundle waviness. The initial failure mode was the fiber bundle separation when the waviness ratio was large while it was the fiber bundle fracture when the waviness ratio was small. It was also found that the stress distributions near the free surface were different from those inside. The stress level was much higher inside than near the free surface. However, the boundary region was shallow and was limited to the outer-most layer.Keywords
This publication has 18 references indexed in Scilit:
- Global/Local Finite Element Analysis for Textile CompositesJournal of Composite Materials, 1994
- Effective Thermomechanical Behavior of Plain-Weave Fabric-Reinforced Composites Using Homogenization TheoryJournal of Engineering Materials and Technology, 1994
- Applications of a meso-volume-based analysis for textile composite structuresComposites Engineering, 1993
- Modeling Damage in a Plain Weave Fabric-Reinforced Composite MaterialJournal of Composites Technology and Research, 1993
- The s‐version of the finite element method for multilayer laminatesInternational Journal for Numerical Methods in Engineering, 1992
- Iterative global/local finite element analysisComputers & Structures, 1991
- Modelling of Textile Structural Composites Part I: Processing-science Model for Three-dimensional BraidingThe Journal of the Textile Institute, 1990
- The specified boundary stiffness/force SBSF method for finite element subregion analysisInternational Journal for Numerical Methods in Engineering, 1988
- An exact zooming methodFinite Elements in Analysis and Design, 1985
- Geometrical Principles Applicable to the Design of Functional FabricsTextile Research Journal, 1947