Screen Printed Flexible Water Activated Battery on Woven Cotton Textile as a Power Supply for E-Textile Applications
Open Access
- 16 November 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 206958-206965
Abstract
Electronic textiles (e-textiles) development has been attracting significant research interest over the past two decades, especially in the field of wearable electronics. Fabric based flexible batteries are an attractive solution to the challenge of powering e-textiles. This work presents a simple and scalable textile primary battery, produced via a low-cost screen-printing manufacturing process. The device architecture is purposefully simple, based on a standard aluminum-silver redox reaction and a salt bridge. The battery as manufactured is inactive and requires the addition of water to be activated, and it can therefore be classified as a reserve battery. The battery is suitable for long-term storage, having negligible self-discharge rates. Initial batteries achieved a total area capacity of $101.6~\mu $ Ah/cm 2 and an energy density of 2.178 mWh/cm 3 above 0.8 V. Further refinements of the battery include the inclusion of a novel membrane separator within the woven cotton textile layer and blending the metal salts with polyvinyl alcohol to reduce the number of textile layers. This optimization resulted in an improved performance of $166.8~\mu $ Ah/cm 2 in area capacity and 3.686 mWh/cm 3 in energy density above 0.8 V. This work has demonstrated the feasibility of an aluminum-silver reserve textile battery and demonstrates a novel method for printing a phase inversion membrane separator into the textile. Following an encapsulation process, this flexible textile battery can be easily integrated into a standard woven textile, providing a robust, lightweight and flexible power supply.
Keywords
Funding Information
- U.K., Engineering and Physical Sciences Research Council-EPSRC (EP/P010164/1, EP/L016818/1)
- Zepler Institute Research Collaboration Stimulus Fund (517719111)
This publication has 27 references indexed in Scilit:
- A liquid-activated textile battery for wearable biosensorsJournal of Physics: Conference Series, 2015
- Natural Fiber Welded Electrode Yarns for Knittable Textile SupercapacitorsAdvanced Energy Materials, 2014
- Wearable Electronics and Smart Textiles: A Critical ReviewSensors, 2014
- Smart fabric sensors and e-textile technologies: a reviewSmart Materials and Structures, 2014
- Stitching Circuits: Learning About Circuitry Through E-textile MaterialsJournal of Science Education and Technology, 2012
- A Review on Architectures and Communications Technologies for Wearable Health-Monitoring SystemsSensors, 2012
- Highly Stretchable Alkaline Batteries Based on an Embedded Conductive FabricAdvanced Materials, 2012
- A roadmap on smart textilesTextile Progress, 2010
- Two-step activation of paper batteries for high power generation: design and fabrication of biofluid- and water-activated paper batteriesJournal of Micromechanics and Microengineering, 2006
- Urine-activated paper batteries for biosystemsJournal of Micromechanics and Microengineering, 2005