Design principles for the area density of dimple patterns
Authors:
- 12 May 2014
- journal article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 229 (4) , 538-546
Abstract
Increasing interest has been paid to surface texturing in order to improve tribological properties of sliding surfaces. Currently, the patterns of micro-dimples have attracted more attention since such closed texture cells are supposed to generate additional hydrodynamic pressure easily. It has been proven that the area density of the dimple pattern is a critical parameter for hydrodynamic pressure generation. However, the optimal values of area density obtained by theoretical models are usually different to that obtained from experiments, which show material dependence. In order to understand the design principles of the area density for mixed lubrication regime, a brief review on the studies related to the area density issue of dimple patterns is carried out; the phenomena during contacting and sliding are analyzed numerically in this paper. It is found that the stress concentration and deformation will occur on the contacting and sliding area, and influence the tribological properties of the textured surface significantly depending on the area density and material properties. These negative influences should be considered carefully during surface texture design.Keywords
This publication has 43 references indexed in Scilit:
- Effect of Dimple’s Internal Structure on Hydrodynamic LubricationTribology Letters, 2013
- A review of TRIZ, and its benefits and challenges in practiceTechnovation, 2013
- A semi-deterministic texture-roughness model of the piston ring–cylinder liner contactProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2011
- A novel surface texture for magnetic fluid lubricationSurface and Coatings Technology, 2009
- Geometric Shape Effects of Surface Texture on the Generation of Hydrodynamic Pressure Between Conformal Contacting SurfacesTribology Letters, 2009
- Optimization of the surface texture for silicon carbide sliding in waterApplied Surface Science, 2006
- In-Cylinder Friction Reduction Using a Surface Finish Optimization TechniqueProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2006
- Deterministic Micro Asperities on Bearings and Seals Using a Modified LIGA ProcessJournal of Engineering for Gas Turbines and Power, 2004
- A Laser Surface Textured Parallel Thrust BearingTribology Transactions, 2003
- The Effects of Roughness on Piston Ring Lubrication—Part II: The Relationship between Cylinder Wall Surface Topography and Oil Film ThicknessTribology Transactions, 1995