Rheological, mechanical, and electrical properties of Sr 0.7 Bi 0.2 TiO 3 modified BaTiO 3 ceramic and its composites
Authors:
- 25 January 2023
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 106 (5) , 3052-3065
Abstract
Porous BaTiO 3 ‐based relaxor ferroelectric ceramics with lamellar structure were achieved by ice templating method, and the rheological properties of ceramic slurry for freeze casting were deeply studied. Epoxy resin was then backfilled to generate ceramic–epoxy resin composites. Ceramic–epoxy composites with a lamellar structure were obtained when using a slurry with a ceramic content of 45 wt.%. The nanoindentation results showed that the introduction of ceramic materials into the epoxy resin can significantly improve the penetration resistance and hardness of the material. The dielectric and ferroelectric properties of the composites were also characterized. The interaction between the highly coupled dipoles in the polymers results in a decrease in the breakdown field strength of the composite. The dielectric constant reached up to ∼800. At 220 kV/cm, W rec = 0.62 J/cm 3 , and η was ∼80%. At low frequencies, W rec was ∼0.16 J/cm 3 , which indicated good stability.Keywords
Funding Information
- National Natural Science Foundation of China (51672226, 52073235)
This publication has 74 references indexed in Scilit:
- The effects of carboxylic acids on the aqueous dispersion and electrophoretic deposition of ZrO2Journal of the European Ceramic Society, 2012
- Piezoelectric activity of relaxor-PbTiO3 based single crystals and polycrystalline ceramics at cryogenic temperatures: Intrinsic and extrinsic contributionsApplied Physics Letters, 2010
- Rheological characterization of a gelcasting system based on epoxy resinCeramics International, 2009
- Low Dielectric Loss Polytetrafluoroethylene/TeO 2 Polymer Ceramic CompositesJournal of the American Ceramic Society, 2007
- Nanoindentation and Morphological Studies of Epoxy NanocompositesMacromolecular Materials and Engineering, 2006
- Ceramic Bodies with Complex Geometries and Ceramic Shells by Freeze Casting Using Ice as Mold MaterialJournal of the American Ceramic Society, 2006
- Micro/nanoscopic Characterizations of Epoxy-Silica NanocompositesJournal of Reinforced Plastics and Composites, 2006
- Slurry rheology in wet ultrafine grinding of industrial minerals: a reviewPowder Technology, 2004
- Rheology and structuring in organo-ceramic compositesComposites Part A: Applied Science and Manufacturing, 2001
- Zeta potentials of human salivary micelle-like particlesColloids and Surfaces B: Biointerfaces, 1996