Simulation of Deep Spherical Indentation Using Eulerian Finite Element Methods
- 23 March 2011
- journal article
- Published by ASME International in Journal of Tribology
- Vol. 133 (2) , 021401
Abstract
Simulation of deep indentation, and the associated pile-up effects, requires a robust and accurate finite element model capable of naturally handling the large deformations present. This work successfully demonstrates that the Eulerian formulation is capable of accurately reproducing the forces and general material response of deep indentation. It was found that, in the absence of friction, sink-in dominates at indentation depths less than 1.1% of the indenter radius, there is a transition from sink-in to pile-up from 1.1% to 2.3% of the indenter radius, and pile-up is fully developed at indentation depths larger than 13.2% of the indenter radius for the 4340 steel workpiece and the 0.508 mm radius indenter presented in this work. Friction tended to marginally increase the sink-in and transition depths as well as reduce the material height at the onset of fully developed pile-up due to a reduction in the tensile radial strain directly under the indenter.Keywords
This publication has 24 references indexed in Scilit:
- Identification of yield stress and plastic hardening parameters from a spherical indentation testInternational Journal of Mechanical Sciences, 2007
- A procedure to prevent pile up effects on the analysis of spherical indentation data in elastic–plastic materialsMechanics of Materials, 2007
- A numerical analysis of spherical indentation response of thin hard films on soft substratesInternational Journal of Solids and Structures, 2006
- A numerical approach to spherical indentation techniques for material property evaluationJournal of the Mechanics and Physics of Solids, 2005
- Development of pile-up during spherical indentation of elastic–plastic solidsInternational Journal of Solids and Structures, 2004
- New procedure to determine steel mechanical parameters from the spherical indentation techniqueMechanics of Materials, 2002
- Identification of plastic hardening parameters of metals from spherical indentation testsMaterials Science and Engineering: A, 2001
- Identification of Hardening Parameters of Metals From Spherical Indentation TestsJournal of Engineering Materials and Technology, 2001
- New possibilities of mechanical surface characterization with spherical indenters by comparison of experimental and theoretical resultsThin Solid Films, 1999
- A comprehensive analysis of the static indentation processMaterials Science and Engineering, 1987