Compressive Behavior of Various BCC Lattice Structure
Authors:
- 13 October 2023
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Nano Hybrids and Composites
- Vol. 41, 39-45
Abstract
The lattice structures are a particular type of structures made by the multiply of a unit cell. In addition, their structure is close to some physiological tissues and bone structure, which can allow their use to develop prostheses needed to the rehabilitation or replacement of a body part. Lattice structures are widely used in various engineering applications due to their high weight-to-strength ratio and exceptional energy absorbing performance. The feasibility of using different base materials to fabricate these cellular structures with complex geometries has been significantly widen with the development of additive manufacturing (AM) technology. Additive manufacturing in particular metal selective laser melting (SLM) processes are rapidly being industrialized. In this work, samples with different lattice structures were manufactured by SLM technique using CoCr powder alloy. Compression tests were carried out to characterize their mechanical behavior. Starting from a BCC lattice cell measuring 5x5x5mm and 1mm diameter of the strut, were designed using Catia V5 R19 software. The BCC lattice unit cell consists of 4 solid struts with circular cross-section by which they intersected at 45°angle and modify by adding radius at the intersection of all four struts, furthermore the empty space is filled with BCC cell to increase the stiffens of the structure. The BCC cell was duplicate in three directions (X, Y, Z) measuring 20mm in each direction. To obtain the final part the BCC structure ware intersected with a cylindrical part measuring 20mm in Z direction, 15mm diameter and 1mm wall thickness, resulting a cylindrical part with three different BCC lattice structure inside.Keywords
This publication has 9 references indexed in Scilit:
- Selective Laser Melting and Electron Beam Melting of Ti6Al4V for Orthopedic Applications: A Comparative Study on the Applied Building DirectionMaterials, 2020
- Design and Optimization of Lattice Structures: A ReviewApplied Sciences, 2020
- SLM lattice structures: Properties, performance, applications and challengesMaterials & Design, 2019
- Machinability of Cobalt-based and Cobalt Chromium Molybdenum Alloys - A ReviewProcedia Manufacturing, 2017
- Cryogenic High Speed Machining of Cobalt Chromium AlloyProcedia CIRP, 2016
- Biomedical Co-Cr-Mo Components Produced by Direct Metal Laser Sintering1Materials Today: Proceedings, 2016
- Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological PropertiesMaterials, 2015
- Mechanical response of TiAl6V4 lattice structures manufactured by selective laser melting in quasistatic and dynamic compression testsJournal of Laser Applications, 2014
- Nature of Current Increase for a CoCrMo Alloy: “transpassive” Dissolution vs. Water OxidationInternational Journal of Electrochemical Science, 2013