Study on antimony cake as a technogenic raw material for the production of antimony oxides
- 6 December 2021
- journal article
- research article
- Published by Kyrgyz-Turkish Manas University in MANAS Journal of Engineering
- Vol. 9 (2) , 136-141
Abstract
In the process of hydrometallurgical and pyrometallurgical production of antimony at the Kadamzhai antimony plant of the Kyrgyz Republic, large-tonnage waste was generated: tailing sand, matte, slag, off-balance ore, cakes, furnace fragments, and electrolytes in salt warehouses. The waste cake is poorly studied; accordingly, the elemental and phase compositions of antimony cake have not been established. In this regard, it was noted that antimony in the cake occurs in the form of calcium antimonate and antimony hydroxide. The content of antimony in the mine tailings cakes is from 3.53 to 4.4%, with a high content of iron (27.5%) and sodium (8.86%). Based on the established elemental and phase compositions, a chemical matrix of antimony cake was compiled. The equilibrium compositions were calculated and the concentration distribution of the main elements of the cake (Fe, Na, Si, Sb) and their compounds in the gas phase was found depending on the temperature of the destruction of the solid phase. It was found that condensed antimony oxides are formed in the range of 1098 - 1348 K. Taking into account the range of temperatures for decomposition of the solid phase, a two-stage smelting of antimony cake is proposed (melting and cupellation). The conversion of antimony cake sulfides from the gas phase into a solution was carried out based on a study of the system: antimony sulfide- manganese (IV) dioxide- sulfuric acid - sodium chloride. The pH value and the redox potential (Eh) of the solution were calculated. It is noted that the sulfur compounds of antimony from the cake are converted to antimony oxychloride with the formation of antimony (III) oxide in an alkaline medium. The use of sodium chloride as a chlorinating agent of antimony sulfur compounds does not lead to the formation of toxic phosgene and hydrogen sulfide; in the solid phase, elemental sulfur is released, which is important for minimizing the technogenic load of pollutants on the environment.Keywords
This publication has 11 references indexed in Scilit:
- Antimony as a global dilemma: Geochemistry, mobility, fate and transportEnvironmental Pollution, 2017
- Sequential and simultaneous adsorption of Sb(III) and Sb(V) on ferrihydrite: Implications for oxidation and competitionChemosphere, 2016
- Antimony smelting process generating solid wastes and dust: Characterization and leaching behaviorsJournal of Environmental Sciences, 2014
- Concentration and speciation of antimony and arsenic in soil profiles around the world’s largest antimony metallurgical area in ChinaEnvironmental Geochemistry and Health, 2014
- Antimony(V) removal from water by hydrated ferric oxides supported by calcite sand and polymeric anion exchangerJournal of Environmental Sciences, 2014
- Changes in Sb speciation with waterlogging of shooting range soils and impacts on plant uptakeEnvironmental Pollution, 2013
- Antimony(V) removal from water by iron-zirconium bimetal oxide: Performance and mechanismJournal of Environmental Sciences, 2012
- Antimony pollution in ChinaScience of The Total Environment, 2012
- Removal of antimony from antimony mine flotation wastewater by electrocoagulation with aluminum electrodesJournal of Environmental Sciences, 2011
- The chemistry and behaviour of antimony in the soil environment with comparisons to arsenic: A critical reviewEnvironmental Pollution, 2010