Experimental Evaluation of Nano-encapsulated PCM Dosage in Cementitious Composites for Energy-Efficient Building Envelopes using RSM
- 24 September 2026
- journal article
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 54 (6)
Abstract
The present study evaluates nano-encapsulated phase change materials (nano-PCMs [PCM-N]) incorporated into cementitious composites for thermally efficient building envelopes. Paraffin was encapsulated within a silica shell by a sol–gel route and incorporated into cementitious mixes at different dosages. Response surface methodology (RSM) based on a central composite design was used to optimize PCM dosage and curing time with thermal conductivity, latent heat capacity, and compressive strength as the response variables. Compared with the control mix, the PCM-N composite reduced thermal conductivity from 1.61 to 1.24 W/m·K, corresponding to an approximately 23 % reduction, whereas latent heat capacity reached 70.6 J/g at the highest dosage investigated. Thermal cycling results showed that the PCM-N system retained about 80–85 % of its initial thermal efficiency after 100 cycles, indicating better durability than the micro-PCM system. Under simulated solar loading, the PCM-N wall panel reduced the rear-face temperature from 42.6°C to 34.2°C, and building-scale simulation predicted an energy saving of 12.3 kWh with a carbon dioxide offset of 5.7 kg. The RSM analysis identified an optimal PCM-N dosage of 6.2 wt.% within the high-desirability region. These results demonstrate that silica-shelled PCM-Ns can improve the thermal regulation capability of cementitious composites, thereby maintaining acceptable mechanical performance for energy-efficient building envelope applications.Keywords
This publication has 39 references indexed in Scilit:
- Development of nanomodified-cementitious composite using phase change material for energy saving applicationsApplied Energy, 2023
- Effects of shape-stabilized phase change materials in cementitious composites on thermal-mechanical properties and economic benefitsApplied Thermal Engineering, 2022
- Incorporating PCM-enabled thermal energy storage into 3D printable cementitious compositesCement and Concrete Composites, 2022
- Exterior insulation finishing system using cementitious plaster/microencapsulated phase change material for improving the building thermal storage performanceConstruction and Building Materials, 2021
- Thermal management performance and mechanical properties of a novel cementitious composite containing fly ash/lauric acid-myristic acid as form-stable phase change materialConstruction and Building Materials, 2021
- Machine learning prediction of compressive strength for phase change materials integrated cementitious compositesConstruction and Building Materials, 2020
- Fundamental investigation on the frost resistance of mortar with microencapsulated phase change materialsCement and Concrete Composites, 2020
- A new PCM-TRC composite: A mechanical and physicochemical investigationCement and Concrete Research, 2020
- Multi-scale analysis on thermal properties of cement-based materials containing micro-encapsulated phase change materialsConstruction and Building Materials, 2020
- Thermal energy storage properties and lab‐scale thermal performance in cementitious plaster of composite phase change material for energy efficiency of buildingsEnvironmental Progress & Sustainable Energy, 2020