Effect of Cutting Ratio and Catch on Drag Characteristics and Fluttering Motions of Midwater Trawl Codend
Open Access
- 28 February 2021
- journal article
- research article
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (3) , 256
Abstract
The codend of a trawl net is the rearmost and crucial part of the net for selective fish catch and juvenile escape. To ensure efficient and sustainable midwater trawl fisheries, it is essential to better understand the drag characteristics and fluttering motions of a midwater trawl codend. These are generally affected by catch, cutting ratio, mesh size, and twine diameter. In this study, six nylon codend models with different cutting ratios (no cutting, 6:1, 5:1, 4:1, 7:2, and 3:1) were designed and tested in a professional flume tank under two conditions (empty codends and codends with catch) and five current speeds to obtain the drag force, spatial geometry, and movement trend. As the cutting ratio of empty codends decreased, the drag force decreased, and the drag coefficient increased. The unfolding degree of codend netting and the height of empty codends were found to be directly proportional to the current speed and inversely proportional to the cutting ratio. The positional amplitude of codend with cutting ratio 4:1 was the smallest for catch. The drag force of codends with catch increased as the current speed increased, and first decreased and then increased as the cutting ratio decreased. To ensure the best stability and minimum drag force of the codend, it is recommended to use the 4:1 cutting ratio codend.Keywords
Funding Information
- Hao Tang (31902426, 19YF1419800)
- Liuxiong Xu (D-8002-18-0097)
This publication has 30 references indexed in Scilit:
- Comparative study on the full-scale prediction performance of four trawl nets used in the coastal bottom trawl fishery by flume tank experimental investigationApplied Ocean Research, 2020
- Hydrodynamic performance of bottom trawls with different materials, mesh sizes, and twine thicknessesFisheries Research, 2020
- Predictive models for codend size selectivity for four commercially important species in the Mediterranean bottom trawl fishery in spring and summer: Effects of codend type and catch sizePLOS ONE, 2018
- Effect of Codend Circumference on the Size Selection of Square-Mesh Codends in Trawl FisheriesPLOS ONE, 2016
- Energy performance evaluation of fishing vessels by fuel mass flow measuring systemOcean Engineering, 2011
- Global fishing effort (1950–2010): Trends, gaps, and implicationsFisheries Research, 2011
- The gear shape and cross section of sweep at mouth of a bottom trawlBulletin of the Korean society of Fisheries Technology, 2008
- The influence of twine thickness on the size selectivity of polyamide codends in a Mediterranean bottom trawlFisheries Research, 2007
- Fishing gear associated with global marine catchesFisheries Research, 2006
- The fluid dynamic loading on catch and the geometry of trawl cod–endsProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1997