Numerical Predictions of the Effect of Rotation on Fluid Flow and Heat Transfer in an Engine-Similar Two-Pass Internal Cooling Channel With Smooth and Ribbed Walls
- 30 June 2011
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 134 (2) , 021021
Abstract
In the present study, a two-pass internal cooling channel with engine-similar cross-sections was investigated numerically. The channel featured a trapezoidal inlet pass, a sharp 180 deg bend, and a nearly rectangular outlet pass. Calculations were done for a configuration with smooth walls and walls equipped with 45 deg skewed ribs (P/e=10, e/dh=0.1) at a Reynolds number of Re=50,000. The present study focused on the effect of rotation on fluid flow and heat transfer. The investigated rotation numbers were Ro=0.0 and 0.10. The computations were performed by solving the Reynolds-averaged Navier–Stokes equations (Reynolds-averaged Navier–Stokes method) with the commercial finite-volume solver FLUENT using a low-Re shear stress transport (SST) k-ω turbulence model. The numerical grids were block-structured hexahedral meshes generated with POINTWISE. Flow field measurements were independently performed at German Aerospace Centre Cologne using particle image velocimetry. In the smooth channel, rotation had a large impact on secondary flows. Especially, rotation induced vortices completely changed the flow field. Rotation also changed flow impingement on the tip and the outlet pass sidewall. Heat transfer in the outlet pass was strongly altered by rotation. In contrast to the smooth channel, rotation showed less influence on heat transfer in the ribbed channel. This is due to a strong secondary flow field induced by the ribs. However, in the outlet pass, Coriolis forces markedly affected the rib induced secondary flow field. The influence of rotation on heat transfer was visible in particular in the bend region and in the second pass directly downstream of the bend.Keywords
This publication has 37 references indexed in Scilit:
- Internal blade cooling: The Cinderella of computational and experimental fluid dynamics research in gas turbinesProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2007
- Heat Transfer Technology for Internal Passages of Air‐Cooled Blades for Heavy‐Duty Gas TurbinesAnnals of the New York Academy of Sciences, 2001
- Computational fluid dynamics applied to internal gas-turbine blade cooling: a reviewInternational Journal of Heat and Fluid Flow, 1999
- Heat Transfer Predictions for Rotating U-Shaped Coolant Channels With Skewed Ribs and With Smooth Walls1997
- Prediction of Turbulent Flow and Heat Transfer in a Ribbed Rectangular Duct With and Without RotationJournal of Turbomachinery, 1995
- Heat Transfer in Rotating Serpentine Passages With Trips Skewed to the FlowJournal of Turbomachinery, 1994
- Heat Transfer in Rotating Serpentine Passages With Trips Normal to the FlowJournal of Turbomachinery, 1992
- Prediction of Turbulent Flow and Heat Transfer in a Radially Rotating Square DuctJournal of Turbomachinery, 1992
- Parametric and Numerical Study of Fully Developed Flow and Heat Transfer in Rotating Rectangular DuctsJournal of Turbomachinery, 1991
- Heat Transfer in Rotating Serpentine Passages With Smooth WallsJournal of Turbomachinery, 1991