The Effects of Stress Dwells and Varying Mean Strain on Crack Growth During Thermal Mechanical Fatigue
Authors:
- 1 July 1981
- journal article
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 9 (4) , 209-215
Abstract
Two types of test were used to evaluate the effects of creep and thermomechanical fatigue (TMF) on the crack growth rates of two nickel-base superalloys: directionally solidified MAR-M200 + hafnium and conventionally cast B-1900 + hafnium. In the test type designated simulated creep/TMF, the mean strain was incremented by a fixed amount at the maximum cycle temperature of each 20th TMF cycle. For the test type designated as creep/TMF, a constant stress was imposed at the maximum temperature for a fixed time period of each 20th TMF cycle. The crack growth rates for both test types were generally higher than the average rates of the baseline data from pure TMF tests. The fracture surfaces of the simulated creep/TMF specimens showed a considerable amount of plane stress behavior, that is, changes in crack planes and growth along steep angular planes. On the other hand, the fracture surfaces of the creep/TMF specimens were more typical of crack growth under plane strain conditions. A strong correlation was found for both alloys between baseline primary creep rates and cumulative creep rates of the interaction test specimens.Keywords
This publication has 18 references indexed in Scilit:
- Hold-time effect of a single overload on crack retardation at elevated temperatureEngineering Fracture Mechanics, 1979
- Surface Crack Life Prediction: An Overview1979
- Some observations of overlapping interacting cracksEngineering Fracture Mechanics, 1978
- The use of the C∗ parameter in predicting creep crack propagation ratesThe Journal of Strain Analysis for Engineering Design, 1977
- The application of fracture mechanics to life prediction of cooling hole configurations in thermal-mechanical fatigueEngineering Fracture Mechanics, 1977
- A new approach to estimate fatigue crack delay due to a single cycle overloadEngineering Fracture Mechanics, 1977
- Fatigue Growth of Surface Cracks1977
- Thermomechanical Fatigue Crack Propagation in an Anisotropic (Directionally Solidified) Nickel-Base Superalloy1976
- Low-Cycle Thermal Mechanical Fatigue Testing1976
- Thermal-Mechanical Fatigue Crack Propagation in Nickel- and Cobalt-Base Superalloys Under Various Strain-Temperature Cycles1973