Preparation and Characterization of Fly Ash Coated with Zinc Oxide Nanocomposites
Open Access
Abstract
Calcined fly ash (CFA) was first obtained by calcining fly ash (FA) at 815 °C for two hours. Then, composite powders of CFA coated with zinc oxide nanoparticles (ZnO/CFA, ZCFA) were prepared by heterogeneous nucleation method. The samples were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Scanning electronic microscopy (SEM), Whiteness, and Brunauer-Emmett-Teller specific surface area (BET). Effects of pH value, reaction temperature and time, coating amount, solid-to-liquid ratio, the coating agent concentrations, and dropping speed on the whiteness of ZCFA powders were studied. It was shown that after coated with ZnO particles, the whiteness of CFA was increased from 27.0 to 62.6%, and the specific surface area was increased from 5.80 to 14.61 m2/g. Needle ZnO with the average grain size of 46 nm was deposited on the surface of CFA. Si–O–Zn–OH bonds were formed.Keywords
Funding Information
- National Natural Science Foundation of China (51804214)
- Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi (2019L0162)
This publication has 22 references indexed in Scilit:
- Mechanical and thermal properties of fly ash-filled geopolymersJournal of Thermal Analysis and Calorimetry, 2019
- Study on Tensile Behavior of Fly Ash Reinforced Hybrid Polymer Matrix CompositeMaterials Today: Proceedings, 2018
- Experimental study on fly ash and lead smelter slag-based geopolymer concrete columnsConstruction and Building Materials, 2017
- Enhanced photocatalytic performance of cementitious material with TiO 2 @Ag modified fly ash micro-aggregatesChinese Journal of Catalysis, 2017
- Effect of fly ash on properties of crushed brick and reclaimed asphalt in pavement base/subbase applicationsJournal of Hazardous Materials, 2017
- Fly ash-based geopolymer: clean production, properties and applicationsJournal of Cleaner Production, 2016
- Opportunities and challenges in the use of coal fly ash for soil improvements – A reviewJournal of Environmental Management, 2014
- Effect of surface modification of fly ash on the mechanical, thermal, electrical and morphological properties of polyetheretherketone compositesMaterials Science and Engineering: A, 2011
- Characteristics of coal fly ash and adsorption applicationFuel, 2008
- Environmental-benign utilisation of fly ash as low-cost adsorbentsJournal of Hazardous Materials, 2006