Electromagnetic imaging of a complex ore body: 3D forward modeling, sensitivity tests, and down-mine measurements
- 1 January 2007
- journal article
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 72 (2) , F85-F95
Abstract
This study investigated the capability of audio-magnetotellurics (AMT) not only to detect, but also to delineate complex conductive ore bodies at minable depths. A detailed 3D numerical-electrical resistivity model of the Bathurst no. 12 deposit (New Brunswick, Canada) was constructed using available geologic and geophysical information. Different geologic and data acquisition conditions were simulated: presence of overburden; different geometries, dimensions, and positions of the ore body; and different data sampling regimes. The behavior of the surface 3D electromagnetic fields was compared with that from bodies of infinite strike extent. The 3D and 2D AMT responses were similar at high frequencies, so 2D modeling was shown to be both valid and sufficient. However, at low frequencies only those responses for current flow perpendicular to the body (the transverse magnetic mode in a 2D case), were reasonably similar. The 2Dinversions showed that the position and the top of the 3D ore body were well resolved, but the bottom of the ore body's resis-tivity were poorly resolved. To increase resolution at depth below ore bodies, and to possibly extend mine life, we recommend that AMT measurements are taken from within mines. Simple mod-els of ore bodies were simulated to show responses at depth, and to undertake body stripping of the overlying structures. The tests showed that conductive structures above the measurement level can have a strong influence on imaging of conducting zones below, and can produce distortion effects in apparent resistivity and phase. Although the body-stripping approach reduces these effects and gives an indication of whether there are conductive structures below, the resulting image is considerably different from that of a model without overlying conductive structures. Full 3D inversion, holding known structures at constant, is required.Keywords
This publication has 31 references indexed in Scilit:
- A new methodology for the acquisition and processing of audio-magnetotelluric (AMT) data in the AMT dead bandGeophysics, 2005
- The magnetotelluric phase tensorGeophysical Journal International, 2004
- Okak Bay AMT data-set case study: Lessons in dimensionality and scaleGeophysics, 2003
- 2D inversion of 3D magnetotelluric data: The Kayabe datasetEarth, Planets and Space, 1999
- Robust multiple-station magnetotelluric data processingGeophysical Journal International, 1997
- High-Performance Three-Dimensional Electromagnetic Modelling Using Modified Neumann Series. Wide-Band Numerical Solution and ExamplesJournal of geomagnetism and geoelectricity, 1997
- Tensor CSAMT studies at the Buchans Mine in central NewfoundlandGeophysics, 1993
- Decomposition of magnetotelluric impedance tensors in the presence of local three‐dimensional galvanic distortionJournal of Geophysical Research, 1989
- Static shift of magnetotelluric data and its removal in a sedimentary basin environmentGeophysics, 1988
- The problem of current channelling: A critical reviewSurveys in Geophysics, 1983